Skip Headers
Oracle® Database Advanced Replication
11g Release 2 (11.2)

Part Number E10706-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

B Column Length Semantics and Unicode

This appendix contains information about replication support for column length semantics and Unicode.

This appendix contains these topics:

See Also:

The following documents contain more information about length semantics and Unicode:

Column Length Semantics for Replication Sites and Table Columns

Column length semantics determine whether the length of a column is specified in bytes or in characters. You use BYTE to specify that the length is in bytes, and you use CHAR to specify that the length is in characters. CHAR length semantics is also known as codepoint length semantics.

Because some character sets require more than one byte for each character, a specification of 10 BYTE for a column might actually store less than 10 characters for certain character sets, but a 10 CHAR specification ensures that the column can store 10 characters, regardless of the character set. Only Oracle9i Database or later databases can specify CHAR length semantics.

You set the length semantics for an Oracle database using the NLS_LENGTH_SEMANTICS initialization parameter, and all VARCHAR2 and CHAR columns use the setting specified for this initialization parameter as the default. If this initialization parameter is not set, then the default setting is BYTE.

An individual column can override the length semantics for the database. For example, if the length semantics for a site is CHAR, then you can still specify BYTE for the length semantics of an individual column using the CREATE TABLE or ALTER TABLE statement.

The following statement creates a table and specifies the column length in bytes:

CREATE TABLE byte_col (a VARCHAR2(10 BYTE));

The following statement creates a table and specifies the column length in characters:

CREATE TABLE char_col (a VARCHAR2(10 CHAR));

Multimaster Support for Column Length Semantics

All master sites in a master group must have the same length semantics, and the individual columns of a master table must have the same length semantics at all master sites. When you have a table in a master group at a master definition site and you want to replicate that table to a new master site, you can create the table at the new site in one of the following ways:

The following sections describe column length semantics support for each table creation method.

Column Length Semantics Support for Tables Generated by Advanced Replication

When you specify that Advanced Replication generate the table at the new master site, and you are using CHAR length semantics, then both the master definition site and the new master site must be running Oracle9i Database or later. If you specify BYTE length semantics, then these sites can be running a previous Oracle release.

This support is summarized in Table B-1.

Table B-1 Column Length Semantics Support for Generated Tables

Master Definition Site Release Master Definition Site Column Semantics New Master Site Release Resulting Column Semantics at New Master Site

9.2 or later

CHAR

9.2 or later

CHAR

9.2 or later

CHAR

Prior to 9.2

Not supported

Any release

BYTE

Any release

BYTE


Column Length Semantics Support for Precreated Tables

When you precreate the table at the new master site, and you are using CHAR length semantics, then both the master definition site and the new master site must be running Oracle9i Database or later. If you specify BYTE length semantics, then these sites can be running a previous Oracle release.

Also, because you precreated the table manually, it is possible that you specified a different length semantics for a column in the new master table than was specified for the column in the table at the master definition site. If so, Oracle raises an error because a column in a master table must be using the same length semantics at each master site.

This support is summarized in Table B-2.

Table B-2 Column Length Semantics Support for Precreated Tables

Master Definition Site Release Master Definition Site Column Semantics New Master Site Release New Master Site Column Semantics Supported?

9.2 or later

CHAR

9.2 or later

CHAR

Yes

9.2 or later

CHAR

9.2 or later

BYTE

No

9.2 or later

BYTE

9.2 or later

CHAR

No

9.2 or later

(Multibyte character set)

CHAR

Prior to 9.2

BYTE

No

9.2 or later

(Single-byte character set)

CHAR

Prior to 9.2

BYTE

Yes

Prior to 9.2

BYTE

9.2 or later

(Multibyte character set)

CHAR

No

Prior to 9.2

BYTE

9.2 or later

(Single-byte character set)

CHAR

Yes

Any release

BYTE

Any release

BYTE

Yes


Materialized View Support for Column Length Semantics

When you create a materialized view, Oracle determines the length semantics of the columns in the materialized view in the following way:

Materialized view creation fails if an Oracle9i Database or later master has a column with an explicit CHAR specification and a materialized view site running a release prior to Oracle9i Database attempts to create a materialized view based on this master.

Materialized Views with Prebuilt Container Tables

If you prebuild a container table at a materialized view site before you create the materialized view, then the length semantics of the columns in the container table must match the length semantics of the columns in the master. If the length semantics do not match, then an Oracle returns an ORA-12060 error during materialized view creation. You use the ON PREBUILT TABLE clause of the CREATE MATERIALIZED VIEW statement to prebuild a table for a materialized view.

See Also:

The Oracle Database SQL Language Reference for more information about the ON PREBUILT TABLE clause in the CREATE MATERIALIZED VIEW statement

Column Length Semantics Support for Updatable Materialized Views

The following operations are always supported if the length semantics of the columns of an updatable materialized view matches the length semantics of the columns of the materialized view's master:

  • Refreshing the updatable materialized view

  • Pushing DML changes made at the materialized view to the master

If, however, the length semantics do not match and the master is Oracle9i Database or later, then Oracle raises an error when you try to add the materialized view to a materialized view group. To be updatable, a materialized view must belong to a materialized view group. If you use the replication management API, then you run the CREATE_MVIEW_REPOBJECT procedure in the DBMS_REPCAT package to add the materialized view to a materialized view group.

Table B-3 summarizes the length semantics support for updatable materialized views.

Table B-3 Column Length Semantics Support for Updatable Materialized Views

Master Site Release Master Site Column Semantics Materialized View Site Release Materialized View Site Column Semantics Updatable Materialized View Supported?

9.2 or later

CHAR

9.2 or later

CHAR

Yes

9.2 or later

CHAR

9.2 or later

BYTE

No

9.2 or later

BYTE

9.2 or later

CHAR

No

9.2 or later

(Multibyte character set)

CHAR

Prior to 9.2

BYTE

No

9.2 or later

(Single-byte character set)

CHAR

Prior to 9.2

BYTE

Yes

Prior to 9.2

BYTE

9.2 or later

CHAR

Yes

Any release

BYTE

Any release

BYTE

Yes


Note:

The master site in Table B-3 can be either a master site in a multimaster replication environment or a master materialized view site.

DDL Propagation and Column Length Semantics

You can use the DBMS_REPCAT package to propagate a data definition language (DDL) statement that creates a new replicated table or adds columns to an existing replicated table. If you want any of the new columns created by these DDL statements to use CHAR column length semantics, then ensure that you specify CHAR column length semantics explicitly. Otherwise, the column always has BYTE length semantics, even if the replication site itself has CHAR column length semantics set as the default.

The following procedures in the DBMS_REPCAT package enable you to propagate DDL statements:

See Also:

"Column Length Semantics for Replication Sites and Table Columns" for more information about specifying CHAR column length semantics explicitly

Replication Support for Unicode

Unicode is a universal encoded character set that enables you to store information from any language using a single character set. Unicode provides a unique code value for every character, regardless of the platform, program, or language. Unicode is supported in both multimaster and materialized view replication environments. In Oracle9i Database or later, all columns specified as NCHAR or NVARCHAR2 data type are stored in Unicode format.

For both master sites and materialized view sites, replication is possible in an environment with different releases of Oracle using an NCHAR or NVARCHAR2 data type. However, replication is not recommended when one of the replication sites is a release prior to Oracle9i Database and uses a variable width character set because, in this case, there is a possibility of data loss.

Table B-4 summarizes when replication is recommended.

Table B-4 Replication Support for Globalization Support Character Sets

Release of Local Database with NCHAR or NVARCHAR2 Columns Release of Remote Database with NCHAR and NVARCHAR2 Columns Replication Recommended?

9.2 or later

(Stored in Unicode format)

9.2 or later

(Stored in Unicode format)

Yes

Prior to 9.2

(Fixed or variable width national character set format)

Prior to 9.2

(Fixed or variable width national character set format)

Yes

9.2 or later

(Stored in Unicode format)

Prior to 9.2

(Variable width national character set format)

Not Recommended

9.2 or later

(Stored in Unicode format)

Prior to 9.2

(Fixed width national character set format)

Yes

Prior to 9.2

(Variable width national character set format)

9.2 or later

(Stored in Unicode format)

Not Recommended

Prior to 9.2

(Fixed width national character set format)

9.2 or later

(Stored in Unicode format)

Yes


Caution:

Where Table B-4 specifies that replication is not supported, Oracle does not detect an error when you set up replication between the two sites, but data loss can occur later. If data loss occurs, then an error is raised.

Replication of NCLOB Data Type Columns

NCLOB data type columns are always fixed width. Therefore, replication of NCLOB data type columns is supported without restrictions.