Skip Headers
Oracle® Database Error Messages
11g Release 2 (11.2)

Part Number E10880-02
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
 

75 PRVF-00001 to PRVF-09995

PRVF-00001: Could not retrieve static nodelist. Verification cannot proceed
Cause: Error running lsnodes/olsnodes.
Action: Ensure that the executable exists and that it is executable by your OS userid.
PRVF-00002: Could not retrieve local nodename
Cause: Unable to determine local host name using Java network functions.
Action: Ensure hostname is defined correctly using the 'hostname' command.
PRVF-00006: Unable to check the existence of Oracle Home "{0}"
Cause: Could not verify the existence of the Oracle Home specified.
Action: Ensure the Oracle Home location exists and is writeable by your user ID.
PRVF-00020: "{0}" is not writeable
Cause: The path specified is not writeable.
Action: Ensure write access to the path specified.
PRVF-00040: The Remote Shell "{0}" requested by the client does not exist
Cause: Could not locate remote shell requested by the user.
Action: Ensure that the remote shell exists on all the nodes participating in the operation.
PRVF-00041: The Remote shell "{0}" requested by the client is not an executable file
Cause: The remote shell requested by the user is not a file.
Action: Ensure that the remote shell exists on all the nodes participating in the operation and that it is a file with execute permissions.
PRVF-00042: The Remote Copy command "{0}" requested by the client does not exist
Cause: Cannot locate remote copy command requested by the user.
Action: Ensure that the remote copy command exists on all the nodes participating in the operation.
PRVF-00045: The Secure Shell "{0}" requested by the client does not exist
Cause: Could not locate the secure shell executable specified.
Action: Ensure that the executable file specified exists.
PRVF-00046: The Secure Copy command "{0}" requested by the client does not exist
Cause: Could not locate the secure copy executable specified.
Action: Ensure that the executable file specified exists.
PRVF-00047: Unable to execute the Secure Shell "{0}" requested by the client
Cause: Could not execute the secure shell specified.
Action: Ensure that the secure shell specified allows execute access for the current user ID.
PRVF-00048: Unable to execute the Secure Copy command "{0}" requested by the client
Cause: Could not execute the secure copy specified.
Action: Ensure that the secure copy specified allows execute access for the current user ID.
PRVF-00051: The Remote Copy command "{0}" requested by the client is not an executable file
Cause: The remote copy command requested by the user was not an executable file.
Action: Ensure that the remote copy command exists on all the nodes participating in the operation and that it is a file with execute permissions.
PRVF-04001: Check: Space available on "{0}"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
PRVF-04007: User equivalence check failed for user "{0}"
Cause: User equivalence for the specified user did not exist amoung all the nodes participating in the operation.
Action: Verify user equivalence on all the nodes participating in the operation, see "Enabling SSH User Equivalency on Cluster Member Nodes" documentation.
PRVF-04008: User equivalence unavailable on all the specified nodes
Cause: User equivalence doesn't exist between the local node and the remote node(s).
Action: Ensure user equivalence exists on all the nodes specified.
PRVF-04020: Inconsistent group IDs found for group "{0}"
Cause: The group ID for the specified group is not the same across all the nodes.
Action: Make sure that the group has the same group ID across all the nodes.
PRVF-04025: Inventory configuration file "{0}" does not exist
Cause: Cannot locate the inventory configuration file specified.
Action: Ensure that the correct inventory location was supplied and that the inventory file is there.
PRVF-04037: CRS is not installed on any of the nodes
Cause: Could not identify a CRS installation on any node.
Action: Ensure that CRS is installed on all the nodes participating in the operation.
PRVF-04041: CSS is probably working with a non-clustered, local-only configuration on all the nodes
Cause: Oracle CSS was found to be configured to run in a local-only (non-clustered) environment on all the nodes.
Action: Ensure cluster setup is correct and reconfigure Cluster Synchronization Services (CSS) as necessary on the nodes that are supposed to be executing in a clustered environment. See Oracle Cluster Synchronization Services documentation for further information.
PRVF-04042: CSS is probably working with a non-clustered, local-only configuration on nodes:
Cause: Oracle CSS was found to be configured to run in a local-only (non-clustered) environment on the nodes specified.
Action: Ensure cluster setup is correct and reconfigure CSS as necessary on the nodes that are supposed to be executing in a clustered environment, see documentation regarding usage of the 'localconfig' script.
PRVF-04043: Unable to obtain OCR integrity details from any of the nodes
Cause: OCR was not found to be in a healthy state on any of the nodes.
Action: Verify the state of OCR on each of the nodes using 'ocrcheck'.
PRVF-04044: Unable to obtain OCR integrity details from nodes:
Cause: OCR was not found to be in a healthy state on some of the nodes.
Action: Verify the state of OCR on each of the nodes identified using 'ocrcheck'.
PRVF-04046: OCR ID is inconsistent among the nodes
Cause: Multiple OCR ID's found across the cluster nodes specified.
Action: Verify Oracle Clusterware configuration and setup with 'ocrcheck' on each node specified. See 'ocrcheck' documentation for further information.
PRVF-04048: Version of OCR found "{0}", expected version of OCR for this release is "{1}"
Cause: An incorrect version of OCR was found running on all the nodes.
Action: Verify version of OCR running on all the nodes using 'ocrcheck'.
PRVF-04049: OCR version is inconsistent amongst the nodes
Cause: Found different version of OCR running on the cluster nodes.
Action: Ensure that the correct version of OCR is running on all the nodes using 'ocrcheck'.
PRVF-04052: Total space in OCR device is inconsistent amongst the nodes
Cause: Found possible different devices in use across the nodes.
Action: Verify that the same OCR devices are used across the cluster nodes using 'ocrcheck'.
PRVF-04055: OCR integrity is invalid
Cause: Cluster registry integrity check failed.
Action: Verify state of cluster registry using ocrcheck on the nodes participating in the verification operation.
PRVF-04056: OCR integrity results are inconsistent amongst the nodes
Cause: Cluster registry integrity check failed on some of the nodes.
Action: Verify state of cluster registry using ocrcheck on the nodes participating in the verification operation.
PRVF-04060: Unable to retrieve storage information
Cause: Internal error encountered while trying to retrieve storage information.
Action: If problem persists report issue to Oracle support and provide trace files generated when the cluvfy command is executed. Trace files should be located under <CRSHOME>/cv/log.
PRVF-04079: The number of addresses does not match the number of node
Cause: Cannot determine IP address for every node.
Action: Verify each node in the cluster has a valid IP address.
PRVF-04080: Network interface information cannot be obtained from any of the node
Cause: Could not find any network interface on any node in the cluster.
Action: Verify network interface(s) operational status on the cluster nodes.
PRVF-04083: Node reachability check failed from node "{0}"
Cause: Network link to target node could not be verified using PING.
Action: Verify network link to target node using the PING utility.
PRVF-04087: Node connectivity check failed
Cause: Encountered errors during verification of Node Connectivity.
Action: Review errors reported and correct problems.
PRVF-04095: Unable to reach any of the nodes
Cause: Unable to reach any of the nodes using the ping command.
Action: Ensure the nodes specified are accessible.
PRVF-04097: Node "{0}" is not reachable
Cause: Unable to reach the node specified using the ping command.
Action: Ensure the node specified is accessible.
PRVF-04098: User equivalence not found for node "{0}"
Cause: Cannot access node specified using user equivalence.
Action: Ensure user equivalence is setup between the local node and the node specified.
PRVF-04101: Could not find a suitable set of interfaces for VIPs
Cause: Could not find a set of network interface adapters suitable for Virtual IP communication in the cluster .
Action: Ensure that the network interface adapters are installed and configured correctly on each node in the cluster and that each interface can communicate with a network gateway.
PRVF-04102: Could not find a suitable set of interfaces for the private interconnect
Cause: Could not find a set of network interface adapters suitable for Private communication in the cluster.
Action: Ensure that the network interface adapters are installed and configured correctly on each node in the cluster according to RFC 1918, or that the interfaces are not accessible from the public network.
PRVF-04107: Source node "{0}" is not reachable from local node
Cause: Unable to reach the source node specified using the ping command.
Action: Ensure the source node specified is accessible.
PRVF-04108: User equivalence not found for source node "{0}"
Cause: Cannot access source node specified using user equivalence.
Action: Ensure user equivalence is setup between the local node and the source node specified.
PRVF-04112: Cannot identify Oracle Restart installation
Cause: Cannot determine location of Oracle Restart installation.
Action: Insure that the Oracle Restart environment is setup correctly.
PRVF-04113: Unable to obtain OLR integrity details from the local node
Cause: Could not verify the state of OLR on the local node.
Action: Check the status of OLR on the local node using the command 'ocrcheck -local'.
PRVF-04118: Unable to obtain Oracle Restart integrity details from the local node
Cause: Encountered an error when trying to run 'crsctl check has', or OHASD was found to be offline.
Action: Check the status of Oracle Restart using the 'crsctl check has' command on the local node.
PRVF-04123: Inconsistent user IDs found for user "{0}"
Cause: The user ID for the specified user is not the same across all the nodes.
Action: Make sure that the user has the same user ID across all the nodes.
PRVF-04125: Failed to retrieve storage type for "{0}"
Cause: The storage location specified may be non-existent or invalid or the user running the check may not have permissions to access the specified storage.
Action: Specify a valid existing location, and ensure that the user running the check has valid read permissions to this location.
PRVF-04126: Global failure for all nodes during execution of space check command
Cause: CVU's attempt to execute the space check command on all nodes had a total failure.
Action: Make sure that the location specified is a valid location and available on all nodes.
PRVF-04127: Unable to obtain OLR location
Cause: Could not verify the state of OLR.
Action: Check the status of OLR using the command 'ocrcheck -config -local'.
PRVF-04132: Multiple users "{0}" with UID "{1}" exist on "{2}".
Cause: More than one user is found to have the same user ID as specified in the message.
Action: Ensure that no two users share the same UID.
PRVF-04151: Found different access permissions for the above storage location across the nodes specified
Cause: The access permissions for the path specified (i.e. read, write, execute) are different, or could not be determined, across the nodes specified.
Action: Ensure that the access permissions allow access for the Oracle user on all the nodes specified.
PRVF-04152: The access permissions for the above storage location do not allow the user access across the nodes specified
Cause: The access permissions for the path specified (i.e. read, write, execute) do not allow the user access.
Action: Ensure that the access permissions allow access for the Oracle user on all the nodes specified.
PRVF-04164: Size of the OCR location "{0}" does not meet the requirement. [Expected="{1}" ; Found="{2}"]
Cause: Size of the ocr device does not meet the requirement
Action: Increase the size of the ocr device
PRVF-04190: Verification of the hosts config file failed
Cause: The '/etc/hosts' file(s) contain incorrect, or incomplete, network host information.
Action: Review the contents of the node's '/etc/hosts' file and ensure that each entry contains a valid IP address and a canonical host name for the specified IP address.
PRVF-04192: Encountered error while trying to check hosts file
Cause: Could not verify the contents of the '/etc/hosts' file.
Action: Review the node's 'hosts' file and insure that it exists, has necessary permissions and each entry contains at least an IP address and a host name for the IP address specified.
PRVF-04211: The specified OCR location "{0}" is not a partition
Cause: The location specified should be a disk partition rather than the disk itself.
Action: Specify a disk partition as the OCR storage.
PRVF-04212: The specified Voting Disk location "{0}" is not a partition
Cause: The location specified should be a disk partition rather than the disk itself.
Action: Specify a disk partition as the Voting Disk storage.
PRVF-04213: Encountered issues with the following OCR Device/Files
Cause: 'ocrcheck' returned failure, or warning, messages with the Device(s)/File(s) listed.
Action: Run 'ocrcheck' and resolve issues reported.
PRVF-04253: CRS integrity check passed, but encountered some warnings
Cause: Some warnings were encountered while verifying CRS integrity.
Action: Review warnings and make modifications as necessary.
PRVF-04309: The effective group id "{0}" differs from the primary group id "{1}" of user "{2}"
Cause: The user is currently logged into a group that is not user's primary group.
Action: Invoke the application after logging in to the primary group (using command 'newgrp <primary group>').
PRVF-04314: There is no primary group on this Operating System
Cause: An attempt was made to check users primary group on an Operating System where there are no primary groups.
Action: This is an internal error; contact Oracle Support.
PRVF-04317: User "{0}" is part of group "{1}". Check failed
Cause: The user who was executing this check was found to be part of root group.
Action: Use the 'id' command to check if the user is part of root group. Remove the user from root group using the 'usermod' command and try again.
PRVF-04318: Checking that user "{0}" is not part of "{1}" group could not be performed on node "{2}"
Cause: A node specific error occured while checking if user is not part of root group.
Action: Check that the node is accessible and user equivalance exists between the node on which command was executed and the node on which the check failed.
PRVF-04353: Proper soft limit for resource "{0}" not found on node "{1}" [Expected = "{2}" ; Found = "{3}"]
Cause: Soft limit for the resource does not meet the requirement on the specified node.
Action: Modify the resource limits to meet the requirement.
PRVF-04354: Proper hard limit for resource "{0}" not found on node "{1}" [Expected = "{2}" ; Found = "{3}"]
Cause: Hard limit for the resource does not meet the requirement on the specified node.
Action: Modify the resource limits to meet the requirement.
PRVF-04355: Resource soft limit check for "{0}" failed on node "{1}"
Cause: Soft limit of the resource could not be determined.
Action: Ensure that the resource limit configuration is accessible.
PRVF-04356: Resource hard limit check for "{0}" failed on node "{1}"
Cause: Hard limit of the resource could not be determined.
Action: Ensure that the resource limit configuration is accessible.
PRVF-04363: Persistent configuration check for cluster nodes failed
Cause: The nodes IP address configuration was not found to be persistent.
Action: Make the nodes IP address configuration persistent using the 'crsctl pin css' command, see Oracle documentation 'Pinning Cluster Nodes for Oracle Database Release' for further information."
PRVF-04528: Check for existence of config file "{0}" could not be performed on node "{1}".
Cause: Could not verify existence of configuration file specified.
Action: Verify access to node indicated and that the config file exists.
PRVF-04529: Host-guid of node "{0}" is not unique
Cause: The system guid value is not unique across all the cluster nodes.
Action: Ensure that the guid value is unique across all cluster nodes using 'ocrcheck'.
PRVF-04530: OCFS is not configured in runlevel 3,4 and 5 on the node
Cause: Runlevel was not configured with levels 3,4 and 5 all being on.
Action: Check OCFS configuration and ensure the run levels indicated are on.
PRVF-04554: Unable to retrieve {0} resource name from node {1}.
Cause: Could not identify node application resource name specified on the node specified.
Action: Ensure that the node application resource name specified is available for the node specified.
PRVF-04555: Node application "{0}" does not exist on node "{1}"
Cause: Could not identify resource specified on the node specified.
Action: Ensure that the resource specified is available for the node specified.
PRVF-04556: Failed to check existence of node application "{0}" on node "{1}"
Cause: Could not verify existence of the nodeapp identified on the node specified .
Action: Ensure that the resource specified is available on the node specified, see 'srvctl add nodeapps' for further information.
PRVF-04606: User equivalence not found for reference node "{0}"
Cause: Cannot access reference node using user equivalence.
Action: Ensure user equivalence is configured between the local node and the node specified. See Enabling SSH User Equivalency on Cluster Member Nodes documentation for further information.
PRVF-04657: Name resolution setup check for "{0}" (IP address: {1}) failed
Cause: Inconsistent IP address definitions found for the SCAN name identified using DNS and configured name resolution mechanism(s).
Action: Look up the SCAN name with nslookup, and make sure the returned IP addresses are consistent with those defined in NIS and /etc/hosts as configured in /etc/nsswitch.conf by reconfiguring the latter. Check the Name Service Cache Daemon (/usr/sbin/nscd) by clearing its cache and restarting it.
PRVF-04661: Found inconsistent 'hosts' entry in /etc/nsswitch.conf on node {0}
Cause: The 'hosts' specifications in the /etc/nsswitch.conf file is different the node specified.
Action: Ensure the 'hosts' entries define the same lookup order in the /etc/nsswitch.conf file across all cluster nodes.
PRVF-04663: Found configuration issue with the 'hosts' entry in the /etc/nsswitch.conf file
Cause: The 'hosts' specifications in the /etc/nsswitch.conf file should specify 'dns' before 'nis' to ensure proper IP address to name mapping.
Action: Ensure the 'hosts' entries across the cluster nodes define 'dns' lookup before 'nis' lookup.
PRVF-04664: Found inconsistent name resolution entries for SCAN name "{0}"
Cause: The nslookup utility and the configured name resolution mechanism(s), as defined in /etc/nsswitch.conf, returned inconsistent IP address information for the SCAN name identified.
Action: Check the Name Service Cache Daemon (/usr/sbin/nscd), the Domain Name Server (nslookup) and the /etc/hosts file to make sure the IP address for the SCAN names are registered correctly.
PRVF-04758: 'lsnodes' could not be executed on the node
Cause: Error running 'lsnodes'.
Action: Ensure that the executable exists and that it is executable by your OS userid.
PRVF-04759: 'lsnodes' execution failed on the node
Cause: Error running 'lsnodes'.
Action: Ensure that the executable <CRSHOME>/bin/lsnodes exists and that it is executable by your OS userid.
PRVF-04864: Shared path location check failed for: "{0}"
Cause: Cannot write to path location specified.
Action: Verify access to path specified.
PRVF-04866: Shared device location check failed for: "{0}"
Cause: Cannot verify sharedness of location specified.
Action: Verify location specified is shared across cluster.
PRVF-04868: Virtual IP (VIP) "{0}" found for node "{1}"
Cause: The VIP node application identified was found on the node specified.
Action: Removed the specified VIP node application from the node specified.
PRVF-04869: Shared OCR location check failed
Cause: Problem reading inventory file for CRS home location.
Action: Verify inventory file integrity.
PRVF-04950: Error checking Operating System Version compatibility for Universal Storage Manager on node "{0}"
Cause: A remote operation to check Operating System version on the remote node failed.
Action: See the action for the additional error message displayed.
PRVF-04954: Version "{0}" is NOT supported for installing ACFS on node "{1}"
Cause: The version of operating system on the node is not compatible for installing ACFS.
Action: Check documentation for compatible version and install compatible version.
PRVF-05054: Verification of SCAN VIP and Listener setup failed
Cause: Could not identify any SCAN, or Scan Listener, resources on the cluster.
Action: Verify SCAN configuration using 'srvctl config scan'.
PRVF-05056: Scan Listener "{0}" not running
Cause: The identified Listener was not in the running state.
Action: Start the identified Listener using 'srvctl start listener'.
PRVF-05057: Scan Listener port for listener "{0}" do not match other ports
Cause: The port numbers used for the listener identifed do not match in all instances of the Listener started.
Action: Insure that all the port numbers for the identifed Listener match. See the commands 'srvctl config scan' and 'srvctl modify scan' for details on how to inspect and modify scan resource port numbers.
PRVF-05059: An error was encountered while verifying the SCAN configuration
Cause: An error was encountered while obtaining SCAN information.
Action: Review additional messages displayed for details of the error that was encountered.
PRVF-05060: SCAN Listener processing error
Cause: An error was encountered while obtaining SCAN Listener information.
Action: Review additional messages displayed for details of the error that was encountered.
PRVF-05061: SCAN VIP '"{0}"' not running
Cause: The SCAN VIP resources is not in the 'running' state.
Action: Start the SCAN VIP resource using using 'srvctl start scan -i <num>'.
PRVF-05062: SCAN VIP "{0}" and Scan Listener "{1}" not running
Cause: The SCAN VIP and SCAN Listener resources are not in the 'running' state.
Action: Start the SCAN VIP and SCAN Listener resources using 'srvctl'.
PRVF-05064: SCAN and Scan Listener may not function correctly
Cause: The SCAN VIP and/or SCAN Listener are not in the 'Running' state, or the port numbers used for the Listeners do not match across the nodes.
Action: Start the SCAN VIP and/or SCAN Listener, or insure that the port numbers used for the SCAN Listeners match across the nodes in the cluster.
PRVF-05109: ASM Running check failed. ASM is not running on all cluster nodes
Cause: ASM was not running on all the cluster nodes.
Action: Ensure ASM is running on all the cluster nodes, see 'srvctl start asm' for further information.
PRVF-05110: ASM is not running on nodes: "{0}"
Cause: ASM was not running on the cluster nodes specified.
Action: Ensure ASM is running on all the cluster nodes.
PRVF-05114: Disk Group check failed. No Disk Groups configured
Cause: No ASM disk groups were found configured on the ASM instance.
Action: Ensure the necessary disk groups are configured in ASM.
PRVF-05137: Failure while checking ASM status on node "{0}"
Cause: Could not verify ASM running on node specified.
Action: Ensure ASM is running on the node specified.
PRVF-05144: ASM Disk group "{0}" is unavailable on nodes "{1}"
Cause: Could not verify existence of ASM disk group specified on the nodes indicated.
Action: Verify existence of ASM group identified on the specified nodes, see 'asmcmd' for further information.
PRVF-05145: ASM Disk group "{0}" is unavailable on all nodes
Cause: Could not verify existence of ASM disk group specified on all the nodes.
Action: Verify existence of ASM group identified on the cluster nodes.
PRVF-05174: ACFS Driver version is not compatible with Operating System version on node "{0}"
Cause: The version of ACFS driver is not compatible with the Operating system version on the node.
Action: Check documentation for compatible version and install compatible version.
PRVF-05175: Failed to retrieve ACFS driver version on node "{0}". Driver version compatibility check cannot be performed
Cause: The version of the ACFS driver could not be retrieved from specified nodes.
Action: Make sure that ACFS driver is installed on these nodes.
PRVF-05176: Failed to retrieve Operating System version on the local node. ACFS driver version compatibility check will not be performed
Cause: Operating system version on local node could not be determined.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-05177: Global failure when attempting to query ACFS driver state option "{0}" on all nodes
Cause: ACFS driver state could not be obtained on all the nodes.
Action: Make sure that user executing this check has execute permissions on the usm_driver_state command.
PRVF-05184: Check of following Udev attributes of "{0}" failed: "{1}"
Cause: Found incorrect attributes for the specified device.
Action: Ensure that the device attributes are set correctly. See Configurable Dynamic Device Naming documentation (udev) for further information.
PRVF-05193: No devices found matching discovery string "{0}"
Cause: The specified device may not exist on the node being tested.
Action: Specify a correct discovery string that matches to existing devices on the node being tested.
PRVF-05195: No shared devices found
Cause: No shared storage was found based on the discovery string used in the verification.
Action: A message should have been displayed for each shared storage check failure. For each such message, perform the suggested action for that message.
PRVF-05196: Failed to retrieve OCR locations
Cause: An atttempt to retrieve the OCR locations failed, possibly due to incorrect or incomplete Clusterware install, or due to incorrect configuration of the OCR, or due to invalid or incorrect OCR location file ocr.loc.
Action: Make sure that the Clusterware installation and Clusterware configuration has been correctly completed, and the ocr.loc file is present and accessible.
PRVF-05197: Failed to retrieve voting disk locations
Cause: An atttempt to retrieve the voting disk locations failed, possibly due to incorrect or incomplete Clusterware install, or due to incorrect configuration of the Clusterware.
Action: Make sure that the Clusterware installation and Clusterware configuration has been correctly completed.
PRVF-05205: GNS VIP resource configuration check failed.
Cause: An error occurred while trying to obtain GNS VIP resource configuration information.
Action: Look at the accompanying messages for details on the cause of failure.
PRVF-05210: GNS resource is running on multiple nodes "{0}"
Cause: GNS resource should be running on only one node in the cluster at any given time. It was found to be running on multiple nodes at the same time.
Action: Stop the GNS resources running on various nodes using 'srvctl stop gns' command and leave it running on just one node of the cluster.
PRVF-05211: GNS resource is not running on any node of the cluster
Cause: GNS resource should be running on one node of the cluster. GNS resource wasn't running on any node.
Action: GNS can be configured using 'srvctl add gns' command. Use 'srvctl start gns' command to start GNS.
PRVF-05213: GNS resource configuration check failed.
Cause: An error occurred while trying to obtain GNS resource configuration information.
Action: Look at the accompanying messages for details on the cause of failure.
PRVF-05216: The following GNS resolved IP addresses for "{0}" are not reachable: "{1}"
Cause: The listed IP addresses for the fully domain qualified name (FDQN) listed in the message and resolved by GNS were not reachable.
Action: Make sure that the configuration of GNS resource is proper using 'srvctl config gns' command. If GNS is configured correctly make sure that the network administrator has provided a set of IP addresses for the subdomain of the cluster and Domain Name Server (DNS) is forwarding requests for these to the GNS.
PRVF-05217: An error occurred while trying to look up IP address for "{0}"
Cause: An error occurred while trying to translate the fully domain qualified name (FDQN), listed in the message, to IP addresses.
Action: These IP address requests should have been forwarded to GNS by the Domain Name Server (DNS). Check the configuration of GNS resource using 'srvctl config gns' command. If GNS is configured correctly make sure that the network administrator has provided a set of IP addresses for the subdomain of the cluster and DNS is forwarding requests for these to the GNS.
PRVF-05218: "{0}" did not resolve into any IP address
Cause: The fully domain qualified name (FDQN) listed in the message did not resolve into any IP address.
Action: Make sure that the configuration of GNS resource is proper using 'srvctl config gns' command. If GNS is configured correctly make sure that the network administrator has provided a set of IP addresses for the subdomain of the cluster and Domain Name Server (DNS) is forwarding requests for these to the GNS.
PRVF-05219: GNS and GNS VIP resources are running on different nodes. GNS is running on nodes "{1}" while GNS VIP is running on "{0}".
Cause: The GNS and GNS VIP resources were running on different nodes.
Action: If GNS should be running on one node of the cluster at any given point of time. Make sure that GNS is not running on multiple nodes of the cluster using 'srvctl config gns' command. If GNS is running on multiple nodes then shut down all but one using 'srvctl stop gns' command.
PRVF-05220: GNS VIP resource was not running on any node of the cluster
Cause: The GNS VIP resource was not running on any nodes of the cluster.
Action: Make sure that the VIP name specified in 'srvctl add gns' command is an unused address belonging to one of the public networks of the cluster nodes.
PRVF-05253: Command "{0}" executed to retrieve GPNP resource status failed on all of the nodes
Cause: An attempt to execute the displayed command failed on all of the nodes.
Action: Make sure that the nodes of the cluster are accessible from the current node. Make sure that the user executing the check has permission to execute commands on nodes using 'ssh'.
PRVF-05254: Command "{0}" executed on node "{1}" produced no output
Cause: An attempt to run the command listed on the node listed produced no output.
Action: This is an internal error. Contact Oracle support services.
PRVF-05255: The GPNP resource is not in ONLINE status on the following node(s): {0}
Cause: The GPNP resource was found to be in OFFLINE or UNKNOWN state on the nodes listed.
Action: This is not an error if the GPNP resource was shutdown. If it is not the expected state then use the command 'crsctl start res ora.gpnpd -init' to start the GPNP resource.
PRVF-05256: Command "{0}" executed to retrieve the GPNP resource status failed on node(s): {1}
Cause: An attempt to run the command listed failed on the node listed.
Action: Make sure that the nodes listed are accessible from the current node. Make sure that the user executing the check has permission to executed commands on the node(s) listed using 'ssh'.
PRVF-05300: Failed to retrieve active version for CRS on this node
Cause: Could not identify location of CRS home.
Action: Ensure correct installation of CRS.
PRVF-05301: Failed to locate CRS home
Cause: Could not locate the CRS home.
Action: Ensure the install of CRS has completed successfully and the CRS home is setup correctly.
PRVF-05302: Failed to execute the exectask command on node "{0}"
Cause: Could not execute command specified on node listed.
Action: Verify command specified can be exectued on node listed.
PRVF-05305: The Oracle clusterware is not healthy on node "{0}"
Cause: An error was found with the Oracle Clusterware on the node specified.
Action: Review the error reported and resolve the issue specified.
PRVF-05307: Failed to retrieve Oracle Restart home
Cause: Could not identify location of Oracle Restart home.
Action: Ensure that Oracle Local Repository (OLR) was created correctly. See Oracle Local Repository documentation for further information.
PRVF-05308: ohasd is either not running or could not be contacted on node "{0}"
Cause: CRSCTL did not report that OHAS was online.
Action: Review the error information displayed and verify the state of OHAS on the node identified.
PRVF-05311: File "{0}" either does not exist or is not accessible on node "{1}".
Cause: Cannot access the file specified.
Action: Verify that the specified file exists and can be access on the node identified.
PRVF-05312: No ohasd entry was found in /etc/inittab file
Cause: Did not find 'respawn:/etc/init.d/init.ohasd' line in '/etc/inittab' file.
Action: Insure that the OHASD environment has been setup correctly.
PRVF-05313: Failed to search for ohasd entry in /etc/inittab file on node "{0}"
Cause: An error was encountered trying to search for OHASD information in /etc/inittab.
Action: Insure that the OHASD environment has been setup correctly and that /etc/inittab is accessible on the specified node.
PRVF-05314: Could not find CRS, or Oracle Restart, installed on the local node
Cause: Could not locate the CRS, or Oracle Restart, installation from the local node.
Action: Ensure the install of CRS, or Oracle Restart, has completed successfully and the CRS, or Oracle Restart, home is setup correctly.
PRVF-05316: Failed to retrieve version of CRS installed on node "{0}"
Cause: Could not identify location of CRS home.
Action: Verify installation of CRS on the identified node.
PRVF-05317: The Clusterware is currently being upgraded to version: "{0}". The following nodes have not been upgraded and are running Clusterware version: "{1}". "{2}"
Cause: The CRS integrity may have discovered that your Oracle clusterware stack is partially upgraded.
Action: Review warnings and make modifications as necessary. If the warning is due to partial upgrade of Oracle clusterware stack then continue with upgrade and finish it.
PRVF-05319: Oracle Cluster Synchronization Services do not appear to be online.
Cause: An error was encountered when trying to verify the status of Oracle Cluster Synchronization Services.
Action: Verify the state of the Oracle Cluster Synchronization Services using 'crsctl check cluster'.
PRVF-05321: Failed to get the CRS or Oracle Restart home
Cause: Could not locate the CRS, or Oracle Restart, home.
Action: Ensure the install of CRS, or Oracle Restart, has completed successfully and the CRS, or Oracle Restart, home is setup correctly.
PRVF-05401: Clock synchronization check using Network Time Protocol(NTP) failed
Cause: One or more of the Clock Synchronization checks failed.
Action: Correlate with the other failure messages displayed and fix those failures.
PRVF-05402: Warning: Could not find NTP configuration file "{0}" on node "{1}"
Cause: NTP might not have been configured on the node, or NTP might have been configured with a configuration file different from the one indicated.
Action: Configure NTP on the node if not done so yet. Refer to your NTP vendor documentation for details.
PRVF-05403: Operation to check presence of NTP configuration file "{0}" failed on node "{1}"
Cause: The operation to check NTP configuration file failed on node indicated. The failure is due to a reason like incorrect permissions on the configuration file, communications error with the node, missing or inaccessible remote execution binary on the node, etc.
Action: Review the error messages that follow this message and fix the problem(s) indicated.
PRVF-05405: The NTP configuration file "{0}" does not exist on all nodes
Cause: The configuration file specified was not available or was inaccessible on the given nodes.
Action: If you want to use NTP for time synchronization, create this file and setup its configuration as described in your vendor's NTP document. If you plan to use CTSS for time synchronization then NTP configuration should be uninstalled on all nodes of the cluster. Refer to "Preparing Your Cluster" of "Oracle Database 2 Day + Real Application Clusters Guide".
PRVF-05406: NTP Configuration file Check failed
Cause: Attempt to check presence of configuration file failed on one or more nodes.
Action: Look at the related error messages and fix them.
PRVF-05408: NTP Time Server "{0}" is common only to the following nodes "{1}"
Cause: One or more nodes in the cluster do not synchronize with the NTP Time Server indicated.
Action: At least one common NTP Time Server is required for a successful Clock Synchronization check. If there are none, reconfigure all of the nodes in the cluster to synchronize with at least one common NTP Time Server.
PRVF-05410: Check of common NTP Time Server failed
Cause: The NTP query command showed there is no common time server among all of the nodes in the cluster.
Action: At least one common NTP Time Server is required for a successful Clock Synchronization check. Reconfigure all of the nodes in the cluster to synchronize with at least one common NTP Time Server. If you plan to use CTSS for time synchronization then NTP configuration should be uninstalled on all nodes of the cluster. Refer to "Preparing Your Cluster" of "Oracle Database 2 Day+ Real Application Clusters Guide".
PRVF-05411: Query of NTP daemon failed on all nodes on which NTP daemon is running
Cause: Attempt to query the NTP daemon failed on all of the nodes of the cluster because the 'ntpq' command could not be found.
Action: Make sure that the NTP query command 'ntpq' is available on all nodes and the user running the CVU check has execute privilage for it.
PRVF-05413: Node "{0}" has a time offset of {1} that is beyond permissible limit of {2} from NTP Time Server "{3}"
Cause: The time offset for the given node clock with the specified NTP Time Server is beyond permissible limits, possibly due to a clock drift, or due to an incorrectly functioning time server.
Action: Make sure that the Time Server is functioning properly, and if yes, adjust the system clock so that the offset is within limits.
PRVF-05414: Check of NTP Config file failed on all nodes. Cannot proceed further for the NTP tests
Cause: Attempt to check existence of config file failed on all nodes.
Action: Look at the individual error messages displayed for the respective nodes and the overall result message and take appropriate action.
PRVF-05415: Check to see if NTP daemon is running failed
Cause: Attempt to check if the NTP daemon was running failed on nodes of the cluster.
Action: Look at the accompanying error messages for the nodes on which the check failed and fix the problem. If you plan to use CTSS for time synchronization then NTP configuration should be uninstalled on all nodes of the cluster. Refer to "Preparing Your Cluster" of "Oracle Database 2 Day+ Real Application Clusters Guide".
PRVF-05416: Query of NTP daemon failed on all nodes
Cause: An attempt to query the NTP daemon using the 'ntpq' command failed on all nodes.
Action: Make sure that the NTP query command 'ntpq' is available on all nodes and make sure that user running the CVU check has permissions to execute it.
PRVF-05421: NTP configuration file check failed on the following nodes:
Cause: Check of existence of NTP configuration file failed on nodes listed because NTP was not configured on those nodes.
Action: If you plan to use NTP for time synchronization across nodes of the cluster then configure NTP on all of the nodes. If you plan to use CTSS for time synchronization then NTP configuration should be uninstalled on all nodes of the cluster. Refer to "Preparing Your Cluster" of "Oracle Database 2 Day+ Real Application Clusters Guide".
PRVF-05424: Clock time offset check failed
Cause: Offsets on all of the nodes in the cluster were not within limits for any Time Server.
Action: Look at the individual messages displayed and fix the problems indicated.
PRVF-05428: Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
Cause: NTP is not configured on the cluster nodes.
Action: This is not an error if the system administrator intended to use Oracle Cluster Time Synchronization Service (CTSS) for clock synchronization on the cluster. If not then install NTP on all nodes of the cluster according to your NTP vendor documentation.
PRVF-05430: Voting disk configuration does not meet Oracle's recommendation of three voting disk locations
Cause: For high availability, Oracle recommends that you have a minimum of three voting disk locations.
Action: Add additional voting disk locations to meet the Oracle recommended amount of three voting disks.
PRVF-05431: Oracle Cluster Voting Disk configuration check failed
Cause: Unabled to obtain Voting Disk configuration.
Action: Review Clusterware and Voting Disk configuration.
PRVF-05433: The current voting disk state is at high risk
Cause: The current state of the voting disk locations is susceptible to the loss of one voting disk location resulting in failure of the cluster.
Action: Add additional voting disk locations, or bring existing locations online, to reduce the risk of losing one voting disk location.
PRVF-05434: Cannot identify the current CRS software version
Cause: Unable to obtain CRS version from CRSCTL.
Action: Insure that CRSCTL is accessible on the nodes being verified.
PRVF-05435: Voting disk configuration does meet Oracle's recommendation
Cause: For high availability, Oracle recommends that you have more than two voting disk locations.
Action: Add additional voting disk locations.
PRVF-05436: The NTP daemon running on one or more nodes lacks the slewing option "{0}"
Cause: NTP daemon on one or more nodes lacked slewing option.
Action: For more information on slewing option refer to NTP daemon's man pages. Make sure that the NTP daemon is running on all nodes. Make sure that slewing option is specified in the command line of NTP daemon. For a list of nodes on which this check failed look at the accompanying error messages.
PRVF-05439: NTP daemon does not have slewing option "{0}" set on node "{1}"
Cause: NTP daemon on the specified node does not have the slewing option set.
Action: Shutdown and restart the NTP daemon with the slewing option set. For more information on NTP daemon slewing option refer to NTP daemon's man pages.
PRVF-05440: NTP daemon slewing option "{0}" check could not be performed on node "{1}"
Cause: An attempt to obtain the command line options for NTP daemon failed.
Action: Make sure that the NTP daemon is running on the node. Also look at other messages accompanying this message.
PRVF-05442: Could not obtain NTP daemon's command line on any node
Cause: An attempt to obtain the command line options for the NTP daemon's failed on all nodes.
Action: Make sure that the NTP daemon is running on all the nodes. Make sure that slewing option is set on all the nodes of the cluster.
PRVF-05450: Constraint type does not match
Cause: The specified constraint does not relate to space checks.
Action: Make sure that the space constraint data is well formed and consistent in the constratint xml.
PRVF-05451: Missing key data "{0}"
Cause: The data required for constraint check is missing.
Action: Verify that the space constraint data is correctly specified in the constraint xml.
PRVF-05452: Missing key reference data "{0}"
Cause: The reference data required for constraint check is missing.
Action: For a greater than/equal comparison, reference data is required.Verify that the space constraint check reference data is correctly specified in the constraint xml.
PRVF-05453: Invalid data set for "{0}", EXPECTED:"{1}", FOUND: "{2}"
Cause: The specified data is invalid for the space constraint check being performed.
Action: Make sure that correct data is specified, using the values indicated in the message.
PRVF-05454: Qualifier "{0}" is not supported for "{1}"
Cause: The indicated qualifier is not supported for the class indicated in the message.
Action: Make sure that the correct qualifier is specified.
PRVF-05455: Cannot apply invalid constraint
Cause: The specified constraint is invalid.
Action: Specify the correct constraint.
PRVF-05456: Invalid constraint. Compatibility check cannot proceed
Cause: The specified constraint is invalid.
Action: Specify the correct constraint for the compatibility check.
PRVF-05461: Encountered an invalid setting for internal variable "{0}"
Cause: This is an internal error.
Action: Please contact Oracle Support.
PRVF-05470: The NTP daemon''s boot time configuration, in file "{0}", on one or more nodes lacks the slewing option "{1}"
Cause: NTP daemon boot time configuration on one or more nodes lacked slewing option.
Action: Make sure that the slewing option is specified in the file listed. For a list of nodes on which this check failed look at the accomoanying error messages.
PRVF-05472: NTP daemon''s boot time configuration does not have slewing option "{0}" set on node "{1}"
Cause: NTP daemon boot time configuration on the specified node does not have the slewing option set.
Action: The NTP daemon's boot time configuration file is listed with the messages accompanying this message. Make sure that slewing option is set in configuration file. For more information on NTP daemon slewing option refer to NTP daemon's man pages.
PRVF-05473: NTP daemon''s boot time configuration check could not be performed on node "{0}"
Cause: An attempt to obtain the NTP daemon's boot time configuration file failed on the node specified.
Action: Make sure that the NTP daemon is configured on the node and will be started when the node boots up. Make sure that the user running this check has access to the configuration file specified. Also look at other messages accompanying this message.
PRVF-05475: Could not obtain NTP daemon's boot time configuration on any node
Cause: An attempt to obtain the command line options for the NTP daemon's failed on all nodes.
Action: Make sure that the NTP daemon is running on all the nodes. Make sure that slewing option is set on all the nodes of the cluster.
PRVF-05479: Time zone is not the same on all cluster nodes.
Cause: Nodes have different time zone settings.
Action: Ensure that time zone is same on all nodes.
PRVF-05501: The user "{0}" is currently logged in to the group "{1}" which is not the primary group for the user
Cause: The user is currently logged into a group that is not user's primary group.
Action: Invoke the application after logging in to the primary group (using command newgrp <primary group>).
PRVF-05502: Current group ID check cannot be performed
Cause: Attempt to check if the current group ID matches with primary group ID failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-06001: Could not get required information about the interface "{0}"
Cause: Could not get interface information for the interface specified.
Action: Insure that the interface is installed and online on the nodes in the cluster.
PRVF-06002: Unable to get information about interface "{0}" on the following nodes:
Cause: Could not get interface information for the interface specified on the nodes listed.
Action: Insure that the interface is installed and online on the nodes specified.
PRVF-06003: Unable to get network information from node: {0}
Cause: Could not obtain any network interface information from the node specified.
Action: Verify state of network interface adapters on the specified node.
PRVF-06005: Could not find a fully connected subnet that covers all the nodes
Cause: Could not find a network interface adapter that exists in the same subnet on every node in the cluster .
Action: Ensure that the network interface adapters are installed and configured correctly on each node in the cluster.
PRVF-06006: Unable to reach any of the nodes
Cause: Unable to reach any of the nodes using the ping command.
Action: Ensure the nodes specified are accessible with the ping utility.
PRVF-06011: Network interface unavailable on node "{0}"
Cause: Could not find any network interface on the node.
Action: Verify network interface(s) operational status on the node identified.
PRVF-06019: Interface subnet "{0}" does not have a gateway defined
Cause: Could not identify the gateway for the subnet identified.
Action: Define a gateway for the specified subnet.
PRVF-06020: Different MTU values used across network interfaces in subnet "{0}"
Cause: Different MTU values found for the network adapter used between cluster nodes across the specified subnet.
Action: Set the MTU value for that network adapter/subnet to be the same on each node in the cluster.
PRVF-06402: Core file name pattern is not same on all the nodes.
Cause: The core file name pattern is not same on all the nodes.
Action: Ensure that the mechanism for core file naming works consistently on all the nodes. Typically for Linux, the elements to look into are the contents of two files /proc/sys/kernel/core_pattern or /proc/sys/kernel/core_uses_pid. Refer OS vendor documentation for platforms AIX, HP-UX, and Solaris.
PRVF-06407: Core file name pattern can not be obtained from nodes "{0}".
Cause: Unable to execute commands on the nodes specified.
Action: Ensure ability to communicate with, and execute commands on, nodes specified .
PRVF-07501: Sufficient space is not available at location "{0}" on node "{1}" [Required space = {2}]
Cause: Not enough free space at location specified.
Action: Free up additional space or select another location.
PRVF-07524: Kernel version is not consistent across all the nodes.
Cause: The operating system kernel versions do not match across cluster nodes.
Action: Update the kernel version where necessary to have all cluster nodes running the same kernel version.
PRVF-07530: Sufficient physical memory is not available on node "{0}" [Required physical memory = {1}]
Cause: Amount of physical memory (RAM) found does not meet minimum memory requirements.
Action: Add physical memory (RAM) to the node specified.
PRVF-07531: Physical memory check cannot be performed on node "{0}"
Cause: Could not perform check of physical memory on the node indicated.
Action: Ensure ability to access the node specified and view memory information.
PRVF-07532: Package "{0}" is missing on node "{1}"
Cause: A required package is either not installed or, if the package is a kernel module, is not loaded on the specified node.
Action: Ensure that the required package is installed and available.
PRVF-07533: Proper version of package "{0}" is not found on node "{1}" [Required = "{2}" ; Found = "{3}"].
Cause: Package does not meet the requirement.
Action: Upgrade the package to meet the requirement.
PRVF-07534: Package check cannot be performed on node "{0}"
Cause: Package configuration could not be determined.
Action: Ensure that the package configuration is accessible.
PRVF-07535: Proper architecture is not found on node "{0}" [Expected = "{1}" ; Found = "{2}"]
Cause: System architecture does not meet the requirement.
Action: Ensure that the correct software bundle is being used.
PRVF-07536: Architecture check cannot be performed on node "{0}"
Cause: System architecture could not be determined.
Action: Ensure that the correct software bundle is being used.
PRVF-07537: User "{0}" does not exist on node "{1}"
Cause: The specified user does not exist on the specified node.
Action: Create the user on the specified node.
PRVF-07538: User existence check cannot be performed on node "{0}"
Cause: Attempt to check the existence of user on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07539: Group "{0}" does not exist on node "{1}"
Cause: The specified group does not exist on the specified node.
Action: Create the group on the specified node.
PRVF-07540: Group existence check cannot be performed on node "{0}"
Cause: Attempt to check the existence of group on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07542: Kernel version check cannot be performed on node "{0}"
Cause: Unable to execute commands on node specified.
Action: Ensure ability to communicate with, and execute commands on, node specified .
PRVF-07543: OS Kernel parameter "{0}" does not have proper value on node "{1}" [Expected = "{2}" ; Found = "{3}"].
Cause: Kernel parameter value does not meet the requirement.
Action: Modify the kernel parameter value to meet the requirement.
PRVF-07544: Check cannot be performed for kernel parameter "{0}" on node "{1}"
Cause: Kernel parameter value could not be determined.
Action: Ensure that the correct software bundle is being used.
PRVF-07562: Sufficient available memory is not available on node "{0}" [Required available memory = {1}]
Cause: Amount of available memory (RAM) does not meet minimum memory requirements.
Action: Add physical memory (RAM) to the node specified, or free memory being used.
PRVF-07563: Available memory check cannot be performed on node "{0}"
Cause: Could not perform check of available memory on the node indicated.
Action: Ensure ability to access the node specified and view memory information.
PRVF-07564: Incorrect run level set on node "{0}" [Required run level = {1}]
Cause: Found incorrect runlevel on the node specified.
Action: Reboot the specified node with the correct runlevel.
PRVF-07565: Run level check cannot be performed on node "{0}"
Cause: Encountered error when trying to determine runlevel.
Action: Ensure runlevel value can be obtained on the specified node.
PRVF-07566: User "{0}" does not belong to group "{1}" on node "{2}"
Cause: The specified user is not a member of the specified group on the specified node.
Action: Make the user a member of the group on the specified node.
PRVF-07567: Group "{0}" is not the primary group for user "{1}" on node "{2}"
Cause: The specified group is not the primary group for the specified user.
Action: Make the specified group as the primary group for the user.
PRVF-07568: Check cannot be performed for membership of user "{0}" with group "{1}" on node "{2}"
Cause: Attempt to check the group membership of the user on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07571: Process "{0}" not running on node "{1}"
Cause: Required process not running on the specified node.
Action: Ensure that the identified process can be started on the node .
PRVF-07572: Process running check cannot be performed on node "{0}"
Cause: Could not collect process information from the specified node.
Action: Ensure access to node specified and ability to view process information.
PRVF-07573: Sufficient swap size is not available on node "{0}" [Required = {1} ; Found = {2}]
Cause: The swap size found does not meet the minimum requirement.
Action: Increase swap size to at least meet the minimum swap space requirement.
PRVF-07574: Swap size check cannot be performed on node "{0}"
Cause: Could not perform check of swap space on the node indicated.
Action: Ensure ability to access the node specified and view swap space information.
PRVF-07575: Encountered an internal error. The range of reference data for verifying swap size has not been correctly defined
Cause: Swap size could not be determined based on the physical memory available.
Action: This is an internal error that should be reported to Oracle.
PRVF-07584: Multiple versions of package "{0}" found on node {1}: {2}
Cause: Multiple versions of the package were found when only one version was expected.
Action: Ensure that the specified package is installed correctly.
PRVF-07590: "{0}" is not running on node "{1}"
Cause: The process identified is not running on the specified node.
Action: Ensure that the identified process is started and running on the specified node. If it is one of the clusterware daemons then you can use 'crsctl check' command to check status.
PRVF-07591: Check cannot be performed for status of "{0}" on node "{1}"
Cause: An error was encountered trying to determine if the identified process was running on the specified node.
Action: Ensure ability to communicate with the specified node. The status of clusterware daemons can be checked on this node using the 'crsctl check' command.
PRVF-07592: Space availability check for location "{0}" cannot be performed on node "{1}"
Cause: Unable to determine amount of free space available for the specified location on the node identified.
Action: Ensure ability to communicate with the specified node and the ability to access the location identified.
PRVF-07593: CRS is not found to be installed on node "{0}"
Cause: Could not identify CRS installation on the local node.
Action: Ensure that CRS is installed on the local node.
PRVF-07594: {0} is running but is not working effectively on node "{1}"
Cause: Could not communicate with the process specified on the node indicated.
Action: Verify state of CRS on the node indicated using the 'crsctl check' command.
PRVF-07595: CRS status check cannot be performed on node "{0}"
Cause: Could not verify the status of CRS on the node indicated using 'crsctl check'.
Action: Ensure ability to communicate with the specified node. Make sure that clusterware daemons are running using 'ps' command. Make sure that the clusterware stack is up.
PRVF-07596: CSS is probably working with a non-clustered, local-only configuration on node "{0}"
Cause: Oracle CSS was found to be configured to run in a local-only (non-clustered) environment on the specified node.
Action: Ensure cluster setup is correct and reconfigure Cluster Synchronization Services (CSS) as necessary on the nodes that are supposed to be executing in a clustered environment. See Oracle Cluster Synchronization Services documentation for further information.
PRVF-07597: Unable to obtain OCR integrity details from node "{0}"
Cause: OCR was not found to be in a healthy state on the node specified.
Action: Verify the state of OCR on the node specified using 'ocrcheck'.
PRVF-07610: Cannot verify user equivalence/reachability on existing cluster nodes
Cause: Attempts to verify user equivalence, or node reachability, failed for all the existing cluster nodes.
Action: Verify that all the cluster nodes have user equivalence and are reachable.
PRVF-07611: Proper user file creation mask (umask) for user "{0}" is not found on node "{1}" [Expected = "{2}" ; Found = "{3}"]
Cause: The user's OS file creation mask (umask) was not the required setting.
Action: Set appropriate user file creation mask. Modify the users .profile or .cshrc or .bashrc to include the required umask.
PRVF-07612: User file creation mask check cannot be performed for user "{0}" on node "{1}"
Cause: Attempt to check the file creation mask of user on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07700: Path for fixup root directory is either null or is an empty string
Cause: Provided fixup root directory path is either null or an empty string.
Action: Provide appropriate and absolute path for fixup root directory.
PRVF-07701: Path "{0}" for fixup root directory is invalid. It must be specified as an absolute pathname
Cause: Fixup root directory was not specified as an absolute pathname.
Action: Respecify fixup root directory as an absolute pathname.
PRVF-07702: The path "{0}" for fixup root directory is not a valid directory
Cause: Fixup root directory path was not a valid directory.
Action: Respecify fixup root path as a valid directory where files can be created and executed from.
PRVF-07703: The fixup root directory "{0}" is not writeable
Cause: Directory identified is not writeable.
Action: Verify write access to directory specified.
PRVF-07704: The fixup root directory "{0}" cannot be created
Cause: Could not create fixup root directory specified.
Action: Ensure write access along the path for the directory specified.
PRVF-07705: Directory "{0}" cannot be created
Cause: Could not create directory specified.
Action: Ensure write access along the path for the directory specified.
PRVF-07706: File "{0}" cannot be created
Cause: Could not create file specified.
Action: Ensure write access to file location.
PRVF-07709: File "{0}" cannot be copied to file "{1}" on node "{2}"
Cause: Could not copy the source file specified to the target file specified on the identified node.
Action: Ensure access to the node identified and the target location for the file specified.
PRVF-07710: Invalid path has been specified for fixup root directory
Cause: The path specified for the fixup root directory is not correct.
Action: Specify an absolute path for a directory that exists and is writeable by the user performing the verification.
PRVF-07720: Fixup cannot be generated for creating group "{0}" on node "{1}"
Cause: Attempt to generate fixup for group creation on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07721: Fixup cannot be generated for creating user "{0}" on node "{1}"
Cause: Attempt to generate fixup for user creation on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07722: Fixup cannot be generated for setting kernel param "{0}" on node "{1}"
Cause: Attempt to generate fixup for kernel param on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07723: Fixup cannot be generated for setting soft limit for resource "{0}" on node "{1}"
Cause: Attempt to generate fixup for resource soft limit on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07724: Fixup cannot be generated for setting hard limit for resource "{0}" on node "{1}"
Cause: Attempt to generate fixup for resource hard limit on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07725: Fixup cannot be generated for setting runlevel "{0}" on node "{1}"
Cause: Attempt to generate fixup for run level on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07726: Fixup cannot be generated for setting membership of user "{0}" with group "{1}" on node "{2}"
Cause: Attempt to generate fixup for group membership on the specified node failed.
Action: Look at the accompanying error messages displayed and fix the problems indicated.
PRVF-07728: Could not access or create trace file path "{0}". Trace information could not be collected
Cause: Trace file location could not be created, or is not writeable.
Action: Make sure user has write access to location specified, or specify a different location using the environmental variable CV_TRACELOC.
PRVF-07729: Fixup cannot be generated for user "{0}", group {1}, on node "{2}" because the user is not defined locally on the node
Cause: Fixup for group membership could not be generated because user was not found to be locally defined on the specified node.
Action: The fixup will have to be done manually. The user could be a Network Information Service (NIS) or Lightweight Directory Access Protocol (LDAP) user. Based on where the user is defined use appropriate tools to modify the user account.
PRVF-07730: Fixup cannot be generated for user "{0}", group "{1}", on node "{2}" because the group is not defined locally on the node
Cause: Fixup for group membership could not be generated because the group was not found to be locally defined on the specified node.
Action: The fixup will have to be done manually. The group could be a Network Information Service (NIS) or Lightweight Directory Access Protocol (LDAP) user. Based on where the group is defined use appropriate tools to modify the user account.
PRVF-09041: String has bad format: "{0}"
Cause: A parsing exception has occurred, and the string displayed could not parsed.
Action: This message should be part of one or more other messages. Please look at those messages and take appropriate action.
PRVF-09306: OCFS2 is not configured in runlevel 3,4 and 5 on all the nodes
Cause: Runlevel was not configured with levels 3,4 and 5 all being on.
Action: Check OCFS2 configuration and ensure the run levels indicated are on.
PRVF-09653: Command "{0}" to check CTSS status failed on all of the nodes
Cause: CVU attempts to execute the displayed command failed on all of the nodes.
Action: Examine the messages displayed for each node and take action as per those messages.
PRVF-09654: CTSS status check command "{0}" executed successfully on node "{1}", but there was a failure in retrieving the output of this command
Cause: Reason for failure to retrieve output could be due to improper execution.
Action: Try the command manually on the node to verify proper execution, and fix any issues arising out of this.
PRVF-09655: Query of CTSS for time offset and reference produced invalid output on node "{0}" Output: "{1}"
Cause: Failure to correctly parse output could be due to improper execution.
Action: Try the command manually on the node to verify proper execution, and fix any issues arising out of this.
PRVF-09656: The CTSS command to query time offset and reference failed on node "{0}" with error message "{1}"
Cause: Reason for failure to retrieve output could have been be due to improper execution.
Action: Try the command manually on the node to verify proper execution, and fix any issues arising out of this.
PRVF-09657: The CTSS command "{0}" failed to execute correctly or failed to produce valid output on all of the nodes
Cause: Reason for failure could be due to improper execution.
Action: Look at the individual messages for each node and take action as per those messages.
PRVF-09659: The time offset of "{1}" on node "{0}" against reference node "{3}" is NOT within specified limit of "{2}" milliseconds
Cause: One of the clocks, either on the current node, or on the reference node has drifted beyond limits.
Action: Monitor the offset over a longer duration and verify if the offset reduces over this period and falls within the threshold limits. Oracle Time Synchronization Service does periodic adjustments of the clock to attempt to bring it within threshold limits. If the threshold does not fall within limits over a period of time possibly due to a large deviation or drift, it is recommended that the Oracle processes on this node be shutdown, and the clock be adjusted on the problematic node suitably. It is NOT recommended to set a clock backwards.
PRVF-09661: Time offset is NOT within the specified limits on the following nodes: "{0}"
Cause: System clock has drifted from the clock on the reference node for the specified set of nodes.
Action: Look at the individual messages for each node and take action as per those messages.
PRVF-09664: CTSS is in an inconsistent state with some nodes in Observer state and some nodes in Active state. All nodes must be either in Observer state or in Active state. Nodes with CTSS in Active state:"{0}" Nodes with CTSS in Observer state: "{1}"
Cause: Some nodes may have NTP configured and some other nodes may not have NTP configured, resulting in an inconsistent state of CTSS.
Action: Stop Oracle CTSS service on all nodes and restart. Ensure that NTP is either configured on all nodes or not configured on any node.
PRVF-09665: Check of Clusterware install failed on some nodes. Clock Synchronization check will proceed with remnaining nodes
Cause: A valid CRSHome was not found on one or more nodes. The messages displayed prior to this message indicate the list of nodes where a valid Clusteerware install was not found.
Action: Specify the correct set of nodes that contain a valid Clusterware installation, or complete the Clusterware installation on those node(s) and repeat this CVU verification.
PRVF-09666: CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Cause: All of the nodes queried for CTSS state indicate they are in Observer state. In the Observer state, CTSS is not performing active clock synchronization adjustments, but letting the underlying NTP handle this action.
Action: None. This is a normal state.
PRVF-09667: CTSS is in Observer state. Switching over to Windows-specific time synchronization checks
Cause: All of the nodes queried for CTSS state indicate they are in Observer state. In the Observer state, CTSS is not performing active clock synchronization adjustments, but letting the underlying Windows time synchronization mechanisms handle this action.
Action: Look at the results of the Windows time synchronization checks displayed following this message. If there are any errors reported, perform action suggested for those error messages.
PRVF-09668: Command "{0}" executed to retrieve CTSS resource status failed on all of the nodes
Cause: CVU attempts to execute the displayed command failed on all of the nodes.
Action: Examine the messages displayed for each node and take action as per those messages.
PRVF-09669: Failure to query CTSS resource on all nodes in the cluster
Cause: Attempt to query CTSS resource on all of the nodes in the cluster failed. Possibly because clusterware may not be running on the nodes.
Action: Look at the specific error messages reported for each of the nodes and take action as per those messages.
PRVF-09670: Failure checking status of CTSS on node "{1}" using command "{0}"
Cause: CTSS may not OFFLINE, or may not be running, or the remote node may not be accessible.
Action: Try running in the indicated command directly on the specified node and ensure it is up and running, check that the remote node, and check user equivalence.
PRVF-09671: CTSS on node "{1}" is not in ONLINE state, when checked with command "{0}"
Cause: The CTSS daemon is not running on the node, it may have died or may have been stopped.
Action: Restart the CTSS daemon on the specified node.
PRVF-09672: All nodes for which CTSS state was checked failed the check: Nodes: "{0}"
Cause: CTSS is not in ONLINE state on any of nodes, possibly due to node accessibility, or being stopped.
Action: Look at the indvidual messages displayed for each node and perform the suggested action for those messages.
PRVF-09676: Clusterware is not installed on all nodes checked : "{0}"
Cause: A valid clusterware installation was not found on these nodes.
Action: Make sure the correct nodes are being specified in this check, or make sure that clusterware is fully installed on the nodes before running this check for those nodes.
PRVF-09691: Clock Synchronization check without Oracle Cluster Time Synchronization Service (CTSS) is not supported on this platform
Cause: The command line parameter, '-noctss', was specified on the command line which indicates that Clock Synchronization check should be performed without Oracle Cluster Time Synchronization Service (CTSS). This is not supported on this platform.
Action: Run the Clock Synchronization check without the '-noctss' flag.
PRVF-09692: CRS Active version is less than 11.2, performing NTP checks
Cause: CTSS is supported only from release 11.2 onwards. Therefore, the clocksync component check can only run NTP checks.
Action: None
PRVF-09695: Failed to determine operating system patch status on the node "{0}"
Cause: Operating system patch status could not be determined.
Action: Ensure that the operating system configuration is accessible.
PRVF-09800: An exception occurred while attempting to determine storage type for location "{0}"
Cause: The location indicated may not be available on the node, or may have insufficient permissions for access by the user running the CVU check.
Action: Make sure that the location is available on the node, and has the right permissions to allow the user running the CVU check to read its attributes.
PRVF-09801: The storage location "{0}" is not a device, and therefore invalid for running Udev permissions check
Cause: UDev permissions check are valid only for storage devices, and not valid for any kind of file system.
Action: Make sure that a valid storage device location is specified. If the location is derived from an ASM discovery string, make sure that the discovery string specified points to one or more storage devices, and not filesystems.
PRVF-09802: Attempt to get udev info from node "{0}" failed
Cause: Attempt to read the udev permissions file failed, probably due to missing permissions directory, missing or invalid permissions file, or permissions file not accessible to use account running the check.
Action: Make sure that the udev permissions directory is created, the udev permissions file is available, and it has correct read permissions for access by the user running the check.
PRVF-09806: Failed to get storage attributes to compare udev attributes against, udev attributes check aborted
Cause: In order to compare Udev attributes for a given storage location, the expected storage attributes are required to compare against. There was a failure to get these attributes, possibly due to invalid on non-existing clusterware installation.
Action: Make sure that a valid Clusterware install exists on the node.
PRVF-09807: Encountered an internal error. The range of reference data for verification of kernel param "{0}" has not been correctly defined for node "{1}"
Cause: No reference range defined to be used to calculate expected value.
Action: Define a reference range.
PRVF-09809: Proper OS Patch is not found on node "{0}" [Expected = "{1}" ; Found = "{2}"]
Cause: Required OS Patch is not applied.
Action: Apply the required OS Patch.
PRVF-09810: No prereq file defined
Cause: Prereq file was not set.
Action: Set prereq file.
PRVF-09811: Reference data is not available for verifying prerequisites on this operating system distribution
Cause: No reference data was found for this operating system distribution.
Action: Please check the documentation for a list of supported operating system distributions for this product.
PRVF-09903: Check of Clusterware install failed on some nodes. Oracle patch check will proceed with remaining nodes
Cause: A valid CRS home was not found on one or more nodes. The messages displayed prior to this message indicate the list of nodes where a valid Clusteerware install was not found.
Action: Specify the correct set of nodes that contain a valid Clusterware installation, or complete the Clusterware installation on those node(s) and repeat this CVU verification.
PRVF-09905: Clusterware is not installed on the following nodes : "{0}"
Cause: A valid Clusterware installation was not found on these nodes.
Action: Make sure the correct nodes are being specified, and that the Clusterware is fully installed on the nodes before running this check for those nodes.
PRVF-09907: Failed to query patch information from OPatch inventory
Cause: The execution of opatch lsinventory command failed.
Action: Make sure that the install inventory is readable by the user.
PRVF-09908: Failed to query patch information from Oracle executable
Cause: Oracle executable could not be queried for patch information.
Action: Make sure that Oracle executable is present and is readable by the user running CVU.
PRVF-09909: Patch information from OPatch did not match patch information from Oracle executable
Cause: Bug information from OPatch inventory does not match patch information recorded with Oracle executable.
Action: Make sure that all patches are applied correctly, refer to the OPatch user guide for information on patch application. Make sure that Oracle executable is relinked, refer to the Oracle Administrator Guide for information on relinking executables.
PRVF-09910: Patch information is not consistent across nodes
Cause: Bug information from OPatch do not match between the nodes.
Action: Make sure that all patches are applied correctly on all nodes, refer to the OPatch user guide for information on patch application.
PRVF-09913: Patch information from OPatch did not match patch information from Oracle executable on the following nodes:
Cause: Bug information from OPatch inventory does not match patch information recorded with Oracle executable.
Action: Make sure that all patches are applied correctly, refer to the OPatch user guide for information on patch application. Make sure that Oracle executable is relinked, refer to the Oracle Administrator Guide for information on relinking executables.
PRVF-09914: bug list did not match across nodes for the following nodes
Cause: Bug information from OPatch do not match between the nodes.
Action: Make sure that all patches are applied correctly on all nodes, refer to the OPatch user guide for information on patch application.
PRVF-09990: Antivirus software is running
Cause: Antivirus software was detected to be running.
Action: Oracle recommends that the Antivirus software be disabled. Antivirus may introduce delays in processing that interfere with time-sensitive cluster operations.
PRVF-09991: Owner of device "{0}" did not match the expected owner. [Expected = "{1}"; Found = "{2}"]
Cause: Owner of the device listed was different than required owner.
Action: Change the owner of the device listed or specify a different device.
PRVF-09992: Group of device "{0}" did not match the expected group. [Expected = "{1}"; Found = "{2}"]
Cause: Group of the device listed was different than required group.
Action: Change the group of the device listed or specify a different device.
PRVF-09993: Permissions of device "{0}" did not match the expected permissions. [Expected = "{1}"; Found = "{2}"]
Cause: Permissions of the device listed was different than the required permissions.
Action: Change the permissions on the device listed or specify a different device.
PRVF-09994: Owner, group, permission information could not be obtained for device(s) "{0}" on node "{1}"
Cause: Owner, group and permission information could not be obtained for devices listed on the nodes listed.
Action: "Ensure that the correct devices were specified and that they are created on the indicated node. Make sure that the path exists and is accessible by the user.
PRVF-09995: Owner, group, permission information could not be obtained for all devices on node "{1}"
Cause: Owner, group and permission information could not be obtained for all devices on the node listed.
Action: Make sure that the node is up. Make sure that user equivalence exists on the node listed.