Skip Headers
Oracle® Database 2 Day + Security Guide
11g Release 2 (11.2)

Part Number E10575-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

4 Managing User Privileges

This chapter contains:

See Also:

About Privilege Management

You can control user privileges in the following ways:

Guideline for Granting Privileges

Because privileges are the rights to perform a specific action, such as updating or deleting a table, do not provide database users more privileges than are necessary. For an introduction to managing privileges, see "About User Privileges and Roles" in Oracle Database 2 Day DBA. Oracle Database 2 Day DBA also provides an example of how to grant a privilege.

In other words, the principle of least privilege is that users be given only those privileges that are actually required to efficiently perform their jobs. To implement this principle, restrict the following as much as possible:

For example, generally the CREATE ANY TABLE privilege is not granted to a user who does not have database administrator privileges.

Guideline for Granting Roles to Users

A role is a named group of related privileges that you grant, as a group, to users or other roles. To learn the fundamentals of managing roles, see "Administering Roles" in Oracle Database 2 Day DBA. In addition, see "Example: Creating a Role" in Oracle Database 2 Day DBA.

Roles are useful for quickly and easily granting permissions to users. Although you can use Oracle Database-defined roles, you have more control and continuity if you create your own roles that contain only the privileges pertaining to your requirements. Oracle may change or remove the privileges in an Oracle Database-defined role, as it has with the CONNECT role, which now has only the CREATE SESSION privilege. Formerly, this role had eight other privileges.

Ensure that the roles you define contain only the privileges required for the responsibility of a particular job. If your application users do not need all the privileges encompassed by an existing role, then apply a different set of roles that supply just the correct privileges. Alternatively, create and assign a more restrictive role.

Do not grant powerful privileges, such as the CREATE DATABASE LINK privilege, to regular users such as user SCOTT. (Particularly do not grant any powerful privileges to SCOTT, because this is a well known default user account that may be vulnerable to intruders.) Instead, grant the privilege to a database role, and then grant this role to the users who must use the privilege. And remember to only grant the minimum privileges the user needs.

Guideline for Handling Privileges for the PUBLIC User Group

You should revoke unnecessary privileges and roles from the database server user group PUBLIC. PUBLIC acts as a default role granted to every user in an Oracle database. Any database user can exercise privileges that are granted to PUBLIC. These privileges include EXECUTE on various PL/SQL packages, potentially enabling someone with minimal privileges to access and execute functions that this user would not otherwise be permitted to access directly.

Controlling Access to Applications with Secure Application Roles

A secure application role is a role that can be enabled only by an authorized PL/SQL package. The PL/SQL package itself reflects the security policies necessary to control access to the application.

This section contains:

About Secure Application Roles

A secure application role is a role that can be enabled only by an authorized PL/SQL package. This package defines one or more security policies that control access to the application. Both the role and the package are typically created in the schema of the person who creates them, which is typically a security administrator. A security administrator is a database administrator who is responsible for maintaining the security of the database.

The advantage of using a secure application role is you can create additional layers of security for application access, in addition to the privileges that were granted to the role itself. Secure application roles strengthen security because passwords are not embedded in application source code or stored in a table. This way, the decisions the database makes are based on the implementation of your security policies. Because these definitions are stored in one place, the database, rather than in your applications, you modify this policy once instead of modifying the policy in each application. No matter how many users connect to the database, the result is always the same, because the policy is bound to the role.

A secure application role has the following components:

  • The secure application role itself. You create the role using the CREATE ROLE statement with the IDENTIFIED USING clause to associate it with the PL/SQL package. Then, you grant the role the privileges you typically grant a role.

  • A PL/SQL package, procedure, or function associated with the secure application role. The PL/SQL package sets a condition that either grants the role or denies the role to the person trying to log in to the database. You must create the PL/SQL package, procedure, or function using invoker's rights, not definer's rights. Invoker's rights enable the user to have EXECUTE privileges on all objects that the package accesses. An invoker's right procedure executes with the privileges of the current user, that is, the user who invokes the procedure. These procedures are not bound to a particular schema. They can be run by a variety of users and enable multiple users to manage their own data by using centralized application logic. To create the invoker's rights package, use the AUTHID CURRENT_USER clause in the declaration section of the procedure code.

    The PL/SQL package also must contain a SET ROLE statement or DBMS_SESSION.SET_ROLE call to enable (or disable) the role for the user.

    After you create the PL/SQL package, you must grant the appropriate users EXECUTE privileges on the package.

  • A way to execute the PL/SQL package when the user logs on. To execute the PL/SQL package, you must call it directly from the application before the user tries to use the privileges the role grants. You cannot use a logon trigger to execute the PL/SQL package automatically when the user logs on.

When a user logs in to the application, the policies in the package perform the checks as needed. If the user passes the checks, then the role is granted, which enables access to the application. If the user fails the checks, then the user is prevented from accessing the application.

Tutorial: Creating a Secure Application Role

This tutorial shows how two employees, Matthew Weiss and Winston Taylor, try to gain information from the OE.ORDERS table. Access rights to this table are defined in the EMPLOYEE_ROLE secure application role. Matthew is Winston's manager, so Matthew, as opposed to Winston, will be able to access the information in OE.ORDERS.

In this tutorial:

Step 1: Create a Security Administrator Account

For greater security, you should apply separation of duty concepts when you assign responsibilities to the system administrators on your staff. For the tutorials used in this guide, you will create and use a security administrator account called sec_admin.

To create the sec_admin security administrator account:  

  1. Start Database Control.

    See Oracle Database 2 Day DBA for instructions about how to start Database Control.

  2. Enter an administrator user name (for example, SYSTEM) and password, and then click Login.

    The Database Home page appears.

  3. Click Server to display the Server subpage.

  4. Under Security, select Users.

    The Users page appears.

  5. Click Create.

    The Create User page appears.

  6. Enter the following information:

    • Name: sec_admin

    • Profile: Default

    • Authentication: Password

    • Enter Password and Confirm Password: Enter a password that meets the requirements in "Requirements for Creating Passwords".

    • Default Tablespace: SYSTEM

    • Temporary Tablespace: TEMP

    • Status: UNLOCKED

  7. Click System Privileges to display the System Privileges subpage.

  8. Click Edit List.

    The Modify System Privileges page appears.

  9. In the Available System Privileges list, select the following privileges and then click Move to move each one to the Selected System Privileges list. (Hold down the Control key to select multiple privileges.)

    • CREATE PROCEDURE

    • CREATE ROLE

    • CREATE SESSION

    • SELECT ANY DICTIONARY

  10. Click OK.

  11. Under Admin Option, do not select the boxes.

  12. Click OK.

Step 2: Create User Accounts for This Tutorial

Matthew and Winston both are sample employees in the HR.EMPLOYEES schema, which provides columns for the manager ID and e-mail address of the employees, among other information. You must create user accounts for these two employees so that they can later test the secure application role.

To create the user accounts:  

  1. In Database Control, select the Database Instance link to display the Database Home page.

    If you are not logged in to Database Control, see Oracle Database 2 Day DBA for instructions about how to start Database Control. In the Login page, enter an administrator user name (for example, SYSTEM) and password, and then click Login.

  2. Click Server to display the Server subpage.

  3. Under Security, select Users.

    The Users page appears.

  4. Click Create.

    The Create User page appears.

  5. Enter the following information:

    • Name: mweiss (to create the user account for Matthew Weiss)

    • Profile: DEFAULT

    • Authentication: Password

    • Enter Password and Confirm Password: Enter a password that meets the requirements in "Requirements for Creating Passwords".

    • Default Tablespace: USERS

    • Temporary Tablespace: TEMP

    • Status: Unlocked

  6. Click System Privileges to display the System Privileges subpage.

  7. Click Edit List.

    The Modify System Privileges page appears.

  8. In the Available System Privileges lists, select the CREATE SESSION privilege, and then click Move to move it to the Selected System Privileges list.

  9. Click OK.

    The Create User page appears, with CREATE SESSION listed as the system privilege for user mweiss.

  10. Ensure that the Admin Option for CREATE SESSION is not selected, and then click OK.

    The Users page appears.

  11. Select MWEISS from the list of users, and then from the Actions list, select Create Like. Then, click Go.

  12. In the Create User page, enter the following information to create the user account for Winston, which will be almost identical to the user account for Matthew:

  13. Click OK.

    You do not need to grant wtaylor the CREATE SESSION privilege, because the Create Like action has done of this for you.

  14. Exit Database Control.

Now both Matthew Weiss and Winston Taylor have user accounts that have identical privileges.

Step 3: Create the Secure Application Role

Now, you are ready to create the employee_role secure application role. To do so, you must log on as the security administrator sec_admin. "Step 1: Create a Security Administrator Account" explains how to create the sec_admin account.

To create the secure application role:  

  1. Start SQL*Plus and log on as the security administrator sec_admin.

    SQLPLUS sec_admin
    Enter password: password
    

    SQL*Plus starts, connects to the default database, and then displays a prompt.

    SQL> 
    

    For detailed information about starting SQL*Plus, see Oracle Database 2 Day DBA.

  2. Create the following secure application role:

    CREATE ROLE employee_role IDENTIFIED USING sec_roles;
    

    The IDENTIFIED USING clause sets the role to be enabled (or disabled) only within the associated PL/SQL package, in this case, sec_roles. At this stage, the sec_roles PL/SQL package does not need to exist.

  3. Connect as user OE.

    CONNECT oe
    Enter password: password
    

    If you receive an error message saying that OE is locked, then you can unlock the OE account and reset its password by entering the following statements. For greater security, do not reuse the same password that was used in previous releases of Oracle Database. Enter any password that is secure, according to the password guidelines described in "Requirements for Creating Passwords".

    CONNECT SYS/AS SYSDBA
    Enter password: sys_password
    PASSWORD OE
    Changing password for OE
    New password: password
    Retype new password: password
    Password changed.
    
    CONNECT oe
    Enter password: password
    
  4. Enter the following statement to grant the EMPLOYEE_ROLE role SELECT privileges on the OE.ORDERS table.

    GRANT SELECT ON OE.ORDERS TO employee_role;
    

    Do not grant the role directly to the user. The PL/SQL package will do that for you, assuming the user passes its security policies.

Step 4: Create a Lookup View

You are almost ready to create the procedure that determines who is granted the employee_role role. The procedure will grant the employee_role only to managers who report to Steven King, whose employee ID is 100. This information is located in the HR.EMPLOYEES table. However, you should not use that table in this procedure, because it contains sensitive data such as salary information, and for it to be used, everyone will need access to it. In most real world cases, you create a lookup view that contains only the information that you need. (You could create a lookup table, but a view will reflect the most recent data.) For this tutorial, you create your own lookup view that only contains the employee names, employee IDs, and their manager IDs.

To create the HR.HR_VERIFY lookup view: 

  1. In SQL*Plus, connect as user HR.

    CONNECT hr
    Enter password: password
    

    If you receive an error message saying that HR is locked, then you can unlock the account and reset its password by entering the following statements. For greater security, do not reuse the same password that was used in previous releases of Oracle Database. Enter any password that is secure, according to the password guidelines described in "Requirements for Creating Passwords".

    CONNECT sys/as sysdba
    Enter password: password
    ALTER USER HR ACCOUNT UNLOCK IDENTIFIED BY password;
    CONNECT hr
    Enter password: password
    
  2. Enter the following CREATE VIEW SQL statement to create the lookup table:

    CREATE VIEW hr_verify AS 
    SELECT employee_id, first_name, last_name, email, manager_id 
    FROM employees;
    
  3. Grant the EXECUTE privilege for this view to mweiss and wtaylor by entering the following SQL statements:

    GRANT SELECT ON hr.hr_verify TO mweiss;
    GRANT SELECT ON hr.hr_verify TO wtaylor;
    GRANT SELECT ON hr.hr_verify TO sec_admin;
    

Step 5: Create the PL/SQL Procedure to Set the Secure Application Role

Now, you are ready to create the secure application role procedure. In most cases, you create a package to hold the procedure, but because this is a simple tutorial that requires only one secure application role test (as defined in the procedure), you will create a procedure by itself. If you want to have a series of procedures to test for the role, create them in a package.

A PL/SQL package defines a simple, clear interface to a set of related procedures and types that can be accessed by SQL statements. Packages also make code more reusable and easier to maintain. The advantage here for secure application roles is that you can create a group of security policies that used together present a solid security strategy designed to protect your applications. For users (or potential intruders) who fail the security policies, you can add auditing checks to the package to record the failure.

To create the secure application role procedure:  

  1. In SQL*Plus, connect as user sec_admin.

    CONNECT sec_admin
    Enter password: password
    
  2. Enter the following CREATE PROCEDURE statement to create the secure application role procedure. (You can copy and paste this text by positioning the cursor at the start of CREATE OR REPLACE.)

     
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    
    CREATE OR REPLACE procedure sec_roles AUTHID CURRENT_USER
     AS
    v_user varchar2(50); 
    v_manager_id number :=1;
     BEGIN    
      v_user := lower((sys_context ('userenv','session_user')));
      SELECT manager_id 
         INTO v_manager_id FROM hr.hr_verify WHERE lower(email)=v_user;
       IF v_manager_id = 100
        THEN 
        EXECUTE IMMEDIATE 'SET ROLE employee_role';  
        ELSE NULL; 
       END IF;        
      EXCEPTION  
      WHEN NO_DATA_FOUND THEN v_manager_id:=0;  
     DBMS_OUTPUT.PUT_LINE(v_manager_id);
    END;
    /
    

    In this example:

    • Line 1: Appends the AUTHID CURRENT_USER clause to the CREATE PROCEDURE statement, which creates the procedure using invoker's rights. The AUTHID CURRENT_USER clause creates the package using invoker's rights, using the privileges of the current user.

      You must create the package using invoker's rights for the package to work. Invoker's rights allow the user to have EXECUTE privileges on all objects that the package accesses.

      Roles that are enabled inside an invoker's right procedure remain in effect even after the procedure exits, but after the user exits the session, he or she no longer has the privileges associated with the secure application role. In this case, you can have a dedicated procedure that enables the role for the rest of the session.

      Because users cannot change the security domain inside definer's rights procedures, secure application roles can only be enabled inside invoker's rights procedures.

      See "About Secure Application Roles" for information about the importance of creating the procedure using invoker's rights.

    • Line3: Declares the v_user variable, which will store the user session information.

    • Line 4: Declares the v_manager_id variable, which will store the manager's ID of the v_user user.

    • Line 6: Retrieves the user session information for the user logging on, in this case, Matthew or Winston. To retrieve user session information, use the SYS_CONTEXT SQL function with the USERENV namespace attributes ('userenv', session_attribute), and the write this information to the v_user variable.

      The information returned by this function indicates the way in which the user was authenticated, the IP address of the client, and whether the user connected through a proxy. See Oracle Database SQL Language Reference for more information about SYS_CONTEXT.

    • Lines 7–8: Get the manager's ID of the current user. The SELECT statement copies the manager ID into the v_manager_id variable, and then checking the HR.HR_VERIFY view for the manager ID of the current user. This example uses the employees' e-mail addresses because they are the same as their user names.

    • Lines 9–13: Use an IF condition to test whether the user should be granted the sec_roles role. In this case, the test condition is whether the user reports to Matthew's manager, Steven King, whose employee number is 100. If the user reports to King, as Matthew does, then the secure application role is granted to the user. Otherwise, the role is not granted.

      The result is that the secure application role will grant Matthew Weiss the role because he is a direct report of Steven King, but will deny the role to Winston, because he is not a direct report of Steven King.

    • Lines 10–12: Within the IF condition, the THEN condition grants the role by executing immediately the SET ROLE statement. Otherwise, its ELSE condition denies the grant.

    • Lines 14–15: Use an EXCEPTION statement to set v_manager_id to 0 if no data is found.

    • Line 16: Copies the manager's ID into a buffer so that it is readily available.

    Tip:

    If you have problems creating or running PL/SQL code, check the Oracle Database trace files. The USER_DUMP_DEST initialization parameter specifies the current location of the trace files. You can find the value of this parameter by issuing SHOW PARAMETER USER_DUMP_DEST in SQL*Plus. See Oracle Database Performance Tuning Guide for more information about trace files.

Step 6: Grant the EXECUTE Privilege for the Procedure to Matthew and Winston

At this stage, Matthew and Winston can try to access the OE.ORDERS table, but they are denied access. The next step is to grant them the EXECUTE privilege on the sec_roles procedure, so that the sec_roles procedure can execute, and then grant or deny access, when they try to select from the OE.ORDERS table.

To grant EXECUTE privileges for the sec_roles procedure:  

  • In SQL*Plus, as user sec_admin, enter the following GRANT SQL statements:

    GRANT EXECUTE ON sec_admin.sec_roles TO mweiss;
    GRANT EXECUTE ON sec_admin.sec_roles TO wtaylor;
    

Step 7: Test the EMPLOYEE_ROLE Secure Application Role

You are ready to test the employee_role secure application role by logging on as Matthew and Winston and trying to access the OE.ORDERS table. When Matthew and Winston log on, and before they issue a SELECT statement on the OE.ORDERS table, the sec_roles procedure must be executed for the role verification to take place.

To test the employee_role secure application role, as user MWEISS:  

  1. Connect as user mweiss.

    CONNECT mweiss
    Enter password: password
    
  2. Enter the following SQL statement to run the sec_roles procedure:

    EXEC sec_admin.sec_roles;
    

    This statement executes the sec_roles procedure for the current session.

  3. Perform the following SELECT statement on the OE.ORDERS table:

    SELECT COUNT(*) FROM OE.ORDERS;
    

    Matthew has access to the OE.ORDERS table:

    COUNT(*)
    ----------
           105
    

Now, Winston will try to access the secure application.

To test the employee_role secure application role as user WTAYLOR: 

  1. In SQL*Plus, connect as user wtaylor.

    CONNECT wtaylor
    Enter password: password
    
  2. Enter the following SQL statement to run the sec_roles procedure:

    EXEC sec_admin.sec_roles;
    

    This statement executes the sec_roles procedure for the current session.

  3. Perform the following SELECT statement on the OE.ORDERS table:

    SELECT COUNT(*) FROM OE.ORDERS;
    

    Because Winston does not report directly to Steven King, he does not have access to the OE.ORDERS table. He will never learn the true number of orders in the ORDERS table, at least not by performing a SELECT statement on it.

    ERROR at line 1:
    ORA-00942: table or view does not exist
    

Step 8: Optionally, Remove the Components for This Tutorial

Remove the components that you created for this tutorial.

To remove the components: 

  1. In SQL*Plus, connect as SYS with the SYSDBA privilege.

    CONNECT SYS/AS SYSDBA
    Enter password: password
    
  2. Enter the following DROP statements:

    DROP USER mweiss;
    DROP USER wtaylor;
    

    Do not drop user sec_admin. You will need this user for other tutorials in this guide.

  3. In SQL*Plus, connect as user sec_admin.

    CONNECT sec_admin
    Enter password: password
    
  4. Enter the following DROP SQL statements:

    DROP ROLE employee_role;
    DROP PROCEDURE sec_roles;
    
  5. Connect as user HR, and then drop the HR_VERIFY view.

    CONNECT HR
    Enter password: password
    DROP VIEW hr_verify;
    
  6. Exit SQL*Plus.

    EXIT
    

Initialization Parameters Used for Privilege Security

Table 4-1 lists initialization parameters that you can use to secure user privileges.

Table 4-1 Initialization Parameters Used for Privilege Security

Initialization Parameter Default Setting Description

O7_DICTIONARY_ACCESSIBILITY

FALSE

Controls restrictions on SYSTEM privileges. See "Enabling Data Dictionary Protection" for more information about this parameter.

OS_ROLES

FALSE

Determines whether the operating system identifies and manages the roles of each user.

MAX_ENABLED_ROLES

30

Specifies the maximum number of database roles that users can enable, including roles contained within other roles.

REMOTE_OS_ROLES

FALSE

Specifies whether operating system roles are allowed for remote clients. The default value, FALSE, causes Oracle to identify and manage roles for remote clients.

SQL92_SECURITY

FALSE

Specifies whether users must be granted the SELECT object privilege to execute UPDATE or DELETE statements.


To modify an initialization parameter, see "Modifying the Value of an Initialization Parameter". For detailed information about initialization parameters, see Oracle Database Reference and Oracle Database Administrator's Guide.