Skip Headers
Oracle® Clusterware Administration and Deployment Guide
11g Release 2 (11.2)

Part Number E10717-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

F Oracle Clusterware C Application Program Interfaces

This appendix describes the Oracle Clusterware C application program interfaces (APIs). This appendix contains the following topics:

See Also:

Chapter 5, "Making Applications Highly Available Using Oracle Clusterware" for detailed information about using Oracle Clusterware to make applications highly available

About the Programming Interface (C API) to Oracle Clusterware

This section contains information about using the programming interface (C API) to Oracle Clusterware (CLSCRS.

Overview

CLSCRS is a set of C-based APIs for Oracle Clusterware. The CLSCRS APIs enable you to manage the operation of entities that are managed by Oracle Clusterware. These entities include resources, resource types, servers, and server pools. You use the APIs to register user applications with Oracle Clusterware so that the clusterware can manage them and maintain high availability. Once an application is registered, you can manage it and query the application's status. If you no longer need the application, then you can stop it and unregister it from Oracle Clusterware.

Oracle Clusterware services are provided by Cluster Ready Services that runs as part of Oracle Clusterware. The CLSCRS API uses a context that is explicitly named in all function calls. The API does not store anything at the process or thread level. You can use the callbacks for diagnostic logging.

Note:

You can install the Oracle Clusterware high availability API from the Oracle Database client installation media.

Operational Notes

This section includes the following topics:

Context Initialization and Persistence

To use the CLSCRS APIs, you must first initialize the clscrs context. The calls to create and terminate this context are:

The caller is responsible for terminating the context when it is no longer needed.

Threading Support

None of the CLSCRS APIs spawn threads. Every CLSCRS API function executes in the context of the calling thread. APIs are not reentrant and no thread-affinity on the part of the client is required.

CLSCRS API Data Structures

The following entities are passed into the API calls and contain return values from the API call:

Memory Management

The CLSCRS APIs work on elements and lists. The elements are added to lists. The memory for both elements and lists is allocated and released through explicit API calls. It is the caller's responsibility to release the memory that they allocate. However, when elements are added to lists, only the list must be destroyed: the destruction of the list destroys its elements implicitly. The elements must be destroyed when they are not added to any list. For recursive lists, destroying the parent list also destroys any lists contained within it. The clscrs_sp and clscrs_res elements must be destroyed by the caller. If they are part of a clscrs_splist or clscrs_reslist, destroying the list destroys the respective clscrs_sp and clscrs_res entities.

For example, when a resource is created and added to a resource list, only the resource list must be destroyed, but not the individual resource. Destroying the resource list releases the memory for the individual resource, too.

Memory is allocated by the API through the following calls:

clscrs_sp_create()
clscrs_res_create()
clscrs_serverpool_create()
clscrs_type_create()
clscrs_splist_create()
clscrs_reslist_create()
clscrs_entity_id_create()

Each of the calls in the preceding list has a corresponding clscrs_*_destroy() call.

Error Handling and Tracing

Interactive and non-interactive CLSCRS APIs each use a different error-handling mechanism.

For non-interactive CLSCRS APIs, the error code is returned as the return value of the function call. For example:

clscrsret clscrs_sp_get_value(clscrs_sp *sp, oratext **value);

The error code is returned as a clscrsret value.

For interactive CLSCRS APIs, the output result is represented, as follows:

  1. The return value of the function call provides a high-level output of the request. Did the request reach the server? Was it completely successful, or completely or only partially unsuccessful? A successful return value means the request was received, processed, and the outcome was successful for all entities requested.

  2. For each entity on which the request operated, there is a programmatic completion code stored in the op_status list. If the value is not success, it indicates the high-level type of the problem specific to processing the request for the particular object.

  3. Optionally, the API might indicate that it wants to receive localized, human-readable error, warning, or status messages by using the callback mechanism. Each invocation of the callback provides the message, message type (severity), and the ID of the object to which the callback invocation pertains.

For example:

CLSCRS_STAT clscrs_register_resource2(clscrs_reslist *in_reslist, uword flags,
                                       clscrs_msgf2 msgf, void *msgarg,
                                       clscrs_reslist *op_status);
  1. The function returns an error code of value CLSCRS_STAT.

  2. The crsd sends error messages, warning messages, and progress messages back to the client through the clscrs_msgf2 callback. The client must implement the callback to process these messages returned by the crsd.

  3. In previous Oracle Clusterware releases, the API also contained results of each operation on the Oracle Clusterware entities as part of the op_status list. You can access that information using the following API:

    clscrsret clscrs_res_get_op_status(clscrs_res *res, CLSCRS_STAT *status,
                                        oratext **msg);
    

    The status argument contains a status code about the crsd operation on the Oracle Clusterware entity. Additionally, the msg argument contains a message from the crsd about the result of the operation. Though the op_status list continues to contain the results of the crsd operation for each Oracle Clusterware entity in the msg argument, usage of the msg argument to get the error codes and messages has now been deprecated and is not supported for any use of the API on a new entity. Only pre-existing use cases (for acting on resources, specifically) are supported. Use the callback function to process any messages returned by the crsd.

Callback Mechanism

Interactive CLSCRS APIs provide a callback mechanism that the clients can use to process error messages, warning messages, and progress messages sent by the crsd.

The signature of the callback mechanism is:

typedef  void (*clscrs_msgf2)(void *usrp, const oratext *id, const oratext *msg,
                clscrs_msgtype msgtype);

In the preceding syntax:

Example F-1 describes an example of the callback mechanism.

Example F-1 Callback Mechanism

void myCallback(void *arg, const oratext *pId, const oratext *pMsg,
                clscrs_msgtype msgType)
{
    if (pMsg != NULL)
   {
       cout << pMsg << endl;
    }
}

Example F-2 describes how to use the callback mechanism in an interactive API.

Example F-2 Using the Callback Mechanism In an Interactive API

clscrs_start_resource2(pResIdList, NULL,
                       env, myCallback, NULL,
                       0, pOpStatus);

You can also print debug trace messages for the API, itself by passing the CLSCRS_FLAG_TRACE flag when creating the context. The signature for context creation is:

CLSCRS_STAT clscrs_init_crs(clscrs_ctx **ctx, clscrs_msgf2 errf, void *errCtx,
                             ub4 flags);

For the trace messages to work, you must specify both the CLSCRS_FLAG_TRACE flag and a clscrs_msgf2 callback mechanism in the clscrs_init_crs API.

The clscrs_msgf2 callback mechanism has the following signature:

typedef  void (*clscrs_msgf)(void *usrp, const oratext *msg, sword msglen);

Filters

You can use filters to narrow down Oracle Clusterware entities upon which a CLSCRS API operates. Simple filters are attribute-value pairs with an operator. Operators must be surrounded by spaces, as shown in the examples. You can combine simple filters into expressions called expression filters using Boolean operators.

Supported filter operators are:


=
>
<
!=
co: Contains
st: Starts with
en: Ends with

Supported Boolean operators are AND and OR.

Examples of filters are:

See Also:

Use the clscrs_comparator enum and the clscrs_operator enum located in the $ORA_CRS_HOME/crs/demo/clscrsx.h file to get the correct type for the above comparators and operators, respectively, in the API calls

There are two types of filters and CLSCRS has a set of APIs to create these filters:

See Also:

The $ORA_CRS_HOME/crs/demo/clscrsx.h file for usage information for the clscrs_compfilter_create and clscrs_expfilter_create APIs

Note:

Both the clscrs_compfilter_create and clscrs_expfilter_create APIs allocate memory that must be freed by calling clscrs_filter_destroy().

You can use filters in the following interactive CLSCRS APIs in place of an entity list:


clscrs_start_resource2
clscrs_stat2
clscrs_stop_resource2
clscrs_check_resource2
clscrs_relocate_resource2

Example F-3 describes using filters in an interactive CLSCRS API.

Example F-3 Filters In an Interactive CLSCRS API

clscrs_start_resource2(myCompFilter, NULL,
                       env, msgf2, NULL,
                       0, pOpStatus);

Script Agent Usage

When you use CLSCRS APIs inside script agent entry points, keep the following in mind:

  1. Some actions, such as start, stop, and clean, are executed under a lock on the resource instance. Thus, issuing a request to the server to act on the resource directly or by extension of a relation results in a dead-lock.

  2. Issuing read-only (clscrs_stat2) is generally safe unless it is an initial check, where the script agent must not call back on the server, because that results in a dead-lock, as well. Use the clsagfw APIs to query the check entry point.

See Also:

Appendix B, "Oracle Clusterware Resource Reference" for examples of script agents

Help Interface

You can find the entire list of CLSCRS APIs, including usage information for each, in the $ORA_CRS_HOME/crs/demo/clscrsx.h file, along with a demo called crsapp.c.

Deprecated CLSCRS APIs

Table F-1 lists the deprecated CLSCRS APIs and the corresponding new APIs for Oracle Clusterware 11g release 2 (11.2).

Table F-1 Deprecated CLSCRS APIs

Deprecated Command Replacement
clscrs_register_resource
clscrs_register_resource2
clscrs_start_resource
clscrs_start_resource2
clscrs_stat
clscrs_stat2
clscrs_stop_resource
clscrs_stop_resource2
clscrs_check_resource
clscrs_check_resource2
clscrs_relocate_resource
clscrs_relocate_resource2
clscrs_unregister_resource
clscrs_unregister_resource2
clscrs_msgf
clscrs_msgf2
clscrs_fail_resource

No replacement.



Interactive CLSCRS APIs

The APIs listed in Table F-2 make calls to the Cluster Ready Services daemon (crsd) to run commands. The crsd must be up and running for these APIs to function.

Table F-2 Summary of Interactive CLSCRS APIs for Oracle Clusterware

C API Description
clscrs_register_type

Registers the resource types in the input resource list.

clscrs_register_serverpool

Registers a server pool for the input list of servers.

clscrs_register_resource2

Registers the resources in the input resource list.

clscrs_start_resource2

Notifies Oracle Clusterware to start a named set of resources.

clscrs_stat2

Obtains information about the entities identified in rqlist.

clscrs_stop_resource2

Notifies Oracle Clusterware to stop a named set of resources.

clscrs_check_resource2

Notifies Oracle Clusterware to run the check entry points for the identified resources.

clscrs_relocate_resource2

Relocates the list of resource identifiers.

clscrs_unregister_resource2

Unregisters the resources in the input list of resource names.

clscrs_unregister_type

Unregisters the resource types in the input list.

clscrs_unregister_serverpool

Unregisters the given server pool.

clscrs_relocate_server

Relocates a list of servers.



Non-Interactive CLSCRS APIs

You can use non-interactive CLSCRS APIs for functions such as context initialization, preparing request payloads for interactive APIs, and post-processing output of the interactive APIs. The non-interactive CLSCRS APIs do not call crsd.

A callback error reporting mechanism is not available for the non-interactive CLSCRS APIs. All interactive CLSCRS APIs, except, clscrs_stat2, use this callback mechanism. Clients of these APIs also use the callback mechanism to receive error, warning, and progress messages from the crsd.

You can also use filters to reduce the list of CRS entities. You can also use filters in the interactive APIs to reduce the list of CRS entities.

See Also:

"Error Handling and Tracing", "Callback Mechanism", and "Filters" for more information

Table F-3 describes the non-interactive CLSCRS APIs.

Table F-3 Non-Interactive CLSCRS APIs

C API Description
clscrs_entity_id_destroy

Frees the memory associated with an entity identifier created from clscrs_entity_id_create().

clscrs_exprfilter_create

Constructs an expression filter from comparison and/or expression filters.

clscrs_filter_destroy

Frees the memory for a filter.

clscrs_get_entity_type

Obtains the entity type corresponding to the entity identifier provided.

clscrs_get_fixed_attrlist

Obtains the list of attributes that correspond to an attribute group identifier.

clscrs_get_resource_instance_details

Obtains the resource instance details, such as resource name, cardinality, and degree, from the resource instance identifier that is used.

clscrs_getnodename

Obtains the node name.

clscrs_init_crs

Initializes a context for communications with Oracle Clusterware.

clscrs_is_crs_admin

Checks whether the user is an Oracle Clusterware administrator.

clscrs_res_attr_count

Obtains the number of attributes for a resource.

clscrs_res_create

Creates a new resource.

clscrs_res_destroy

Frees the memory for a resource.

clscrs_res_get_attr

Obtains a resource attribute for a resource.

clscrs_res_get_attr_list

Obtains the attribute list for a resource.

clscrs_res_get_name

Obtains the name of a resource.

clscrs_res_get_op_status

Obtains the status of an operation for an entity.

clscrs_res_get_registered

Obtains the registration status of a resource.

clscrs_res_get_reslist

Obtains the resource list for a resource.

clscrs_res_set_attr_list

Sets the attribute list for a resource.

clscrs_res_set_reslist

Sets the resource list for a resource.

clscrs_reslist_append

Adds a resource to a resource list.

clscrs_reslist_count

Counts the number of resources in a resource list.

clscrs_reslist_create

Creates a new resource list.

clscrs_reslist_delete_res

Deletes a resource from a resource list.

clscrs_reslist_destroy

Frees the memory for a resource list.

clscrs_reslist_find

Finds a resource in a resource list.

clscrs_reslist_first

Obtains the first resource on a resource list.

clscrs_reslist_next

Obtains the current next resource from the resource list.

clscrs_sp_get

Obtains the name and value components of a stringpair.

clscrs_sp_set

Changes the value part of a stringpair.

clscrs_splist_append

Adds a new stringpair (sp) to a stringpair list (splist).

clscrs_splist_create

Creates a new stringpair list.

clscrs_splist_delete_sp

Deletes a stringpair (sp) from a stringpair list (splist).

clscrs_splist_first

Obtains the first stringpair (sp) from a stringpair list (splist).

clscrs_splist_replace

Replaces the value for a stringpair (sp) in a stringpair list (splist).

clscrs_term_crs

Releases a context for communications with CRS.

clscrs_type_create

Creates a new resource type.

clscrs_type_get_attr

Obtains the value/properties of a resource type attribute.

clscrs_type_set_attr

Adds an attribute to a resource type.

clscrs_compfilter_create

Constructs a simple filter that compares two values.

clscrs_entity_id_create

Creates an entity identifier that identifies a CRS entity such as a resource, resource type, server group, and so on.

clscrs_register_serverpool

Registers a server pool for the input list of servers.

clscrs_register_type

Registers the resource types in the input resource list.

clscrs_relocate_server

Relocates a list of servers.

clscrs_res_get_node_list

Obtains the nodelist currently hosting the resource.

clscrs_res_set_attr

Sets a resource attribute for a resource.

clscrs_sp_get_value

Obtains the value component of a stringpair.

clscrs_splist_count

Counts the number of stringpairs (sp) in a stringpair list (splist).

clscrs_splist_create_and_set

Creates a new stringpair list (splist) and set the name and value for the first stringpair in the list.

clscrs_splist_destroy

Frees the memory for a stringpair list (splist).

clscrs_splist_find

Finds the value for a stringpair (sp) in a stringpair list (splist).

clscrs_splist_next

Obtains the current next stringpair (sp) from a stringpair list (splist). Current next SP is effectively the next SP in the SPLIST. The list iterator is stored within the API and is not exposed.

clscrs_stat2

Obtains information about the entities identified in rqlist.