Clob Class

The Clob class defines the common properties of objects of type CLOB. A Clob is a large character object stored as a column value in a row of a database table. A Clob object contains a logical pointer to a CLOB, not the CLOB itself.

Methods of the Clob class enable you to perform specific tasks related to Clob objects, including methods for getting the length of a SQL CLOB, for materializing a CLOB on the client, and for extracting a part of the CLOB.

The only methods valid on a NULL CLOB object are setName(), isNull(), and operator=().

Methods in the ResultSet and Statement classes, such as getClob() and setClob(), enable you to access an SQL CLOB value.

An uninitialized CLOB object can be initialized by:

The setEmpty() method. The CLOB can then be modified by inserting this CLOB into the table and retrieving it using SELECT...FOR UPDATE. The write() method modifies the CLOB; however, the modified data is flushed to the table only when the transaction is committed. Note that an insert is not required.
Assigning an initialized Clob object to it.

Method	Summary
Clob()	`Clob` class constructor.
append()	Appends a `Clob` at the end of the current `Clob`.
close()	Closes a previously opened `Clob`.
closeStream()	Closes the `Stream` object obtained from the current `Clob`.
copy()	Copies all or a portion of a `Clob` or `BFILE` into the current `Clob`.
getCharSetForm()	Returns the character set form of the `Clob`.
getCharSetId()	Returns the character set ID of the `Clob`.
getCharSetIdUString()	Retrieves the characterset name associated with the `Clob`; `UString` version.
getChunkSize()	Returns the smallest data size to perform efficient writes to the `CLOB`.
getContentType()	Returns the content type of the `Clob`.
getOptions()	Returns the `CLOB`'s `LobOptionValue` for a specified `LobOptionTyp`e.
getStream()	Returns data from the `CLOB` as a `Stream` object.
isInitialized()	Tests whether the `Clob` object is initialized.
isNull()	Tests whether the `Clob` object is atomically `NULL`.
isOpen()	Tests whether the `Clob` is open.
length()	Returns the number of characters in the current `CLOB`.
open()	Opens the `CLOB` with read or read/write access.
operator=()	Assigns a `CLOB` locator to the current `Clob` object.
operator==()	Tests whether two `Clob` objects are equal.
operator!=()	Tests whether two `Clob` objects are not equal.
read()	Reads a portion of the `CLOB` into a buffer.
setCharSetId()	Sets the character set ID associated with the `Clob`.
setCharSetIdUString()	Sets the character set ID associated with the `Clob`; used when the environment character set is UTF16.
setCharSetForm()	Sets the character set form associated with the `Clob`.
setContentType()	Sets the content type of the `Clob`.
setEmpty()	Sets the `Clob` object to empty.
setNull()	Sets the `Clob` object to atomically `NULL`.
setOptions()	Specifies a `LobOptionValue` for a particular `LobOptionType`. Enables advanced compression, encryption and deduplication of `CLOB`s.
trim()	Truncates the `Clob` to a specified length.
write()	Writes a buffer into an unopened `CLOB`.
writeChunk()	Writes a buffer into an open `CLOB`.

Clob()

Clob class constructor.

Syntax	Description
Clob();	Creates a `NULL` `Clob` object.
Clob( const Connection *connectionp);	Creates an uninitialized `Clob` object.
Clob( const Clob *srcClob);	Creates a copy of a `Clob` object.

Parameter	Description
connectionp	Connection pointer
srcClob	The source `Clob` object

append()

Appends a CLOB to the end of the current CLOB.

Syntax

void append(
   const Clob &srcClob);

Parameter	Description
srcClob	The `CLOB` to be appended to the current `CLOB`.

close()

Closes a CLOB.

Syntax

void close();

closeStream()

Closes the Stream object obtained from the CLOB.

Syntax

void closeStream(
   Stream *stream);

Parameter	Description
stream	The Stream object to be closed.

copy()

Copies a part or all of a BFILE or CLOB into the current CLOB.

OCCI does not perform any characterset conversions when loading data from a Bfile into a Clob; therefore, ensure that the contents of the Bfile are character data in the server's Clob storage characterset.

Syntax	Description
void copy( const Bfile &srcBfile, unsigned int numBytes, unsigned int dstOffset = 1, unsigned int srcOffset = 1);	Copies a `BFILE` into the current `CLOB`.
void copy( const Clob &srcClob, unsigned int numBytes, unsigned int dstOffset = 1, unsigned int srcOffset = 1);	Copies a `CLOB` into the current `CLOB`. If the destination `CLOB` has deduplication enabled, and the source and destination `CLOB`s are in the same column, the new `CLOB` is created as copy-on-write. All other settings are inherited from the source `CLOB`. If the destination `CLOB` has deduplication disabled, it is a completely new copy of the `CLOB`.

Parameter	Description
srcBfile	The `BFILE` from which the data is to be copied.
srcClob	The `CLOB` from which the data is to be copied.
numBytes	The number of bytes to be copied from the source `BFILE` `or` `CLOB.` Valid values are numbers greater than 0.
dstOffset	The starting position at which data is to be is at 0. The starting position at which to begin writing data into the current `CLOB` Valid values are numbers greater than or equal to 1 written in the destination buffer; the position of the first byte.
srcOffset	The starting position at which to begin reading data from the source `BFILE` or `CLOB`. Valid values are numbers greater than or equal to 1.

getCharSetForm()

Returns the character set form of the CLOB.

Syntax

CharSetForm getCharSetForm() const;

getCharSetId()

Returns the character set ID of the CLOB, in string form.

Syntax

string getCharSetId() const;

getCharSetIdUString()

Retrieves the characterset name associated with the Clob; UString version.

Syntax

UString getCharSetIdUString() const;

getChunkSize()

Returns the smallest data size to perform efficient writes to the CLOB.

Syntax

unsigned int getChunkSize() const;

getContentType()

Returns the content type of the Clob. If a content type has not been assigned, returns a NULL string.

Syntax

string getContentType();

getOptions()

Returns the CLOB's LobOptionValue for a specified LobOptionType.

Throws an exception if attempting to retrieve a value for an option that is not configured on the database column or partition that stores the CLOB.

Syntax

LobOptionValue getOptions(
   LobOptionType optType);

Parameter	Description
optType	The `LobOptionType` setting requested. These may be combined using bitwise `or` (`\|`) to avoid server round trips. See Table 7-1, "Values of Type LobOptionType" and Table 7-2, "Values of Type LobOptionValue"

getStream()

Returns a Stream object from the CLOB. If a stream is open, it is disallowed to open another stream on CLOB object, so the user must always close the stream before performing any Clob object operations. The client's character set id and form is used by default, unless they are explicitly set through setCharSetId() and setEmpty() calls.

Syntax

Stream* getStream(
   unsigned int offset = 1,
   unsigned int amount = 0);

Parameter	Description
offset	The starting position at which to begin reading data from the `CLOB`. If `offset` is not specified, the data is written from the beginning of the `CLOB`. Valid values are numbers greater than or equal to 1.
amount	The total number of consecutive characters to be read. If `amount` is 0, the data is read from the `offset` value until the end of the `CLOB`.

isInitialized()

Tests whether the Clob object is initialized. If the Clob object is initialized, TRUE is returned; otherwise, FALSE is returned.

Syntax

bool isInitialized() const;

isNull()

Tests whether the Clob object is atomically NULL. If the Clob object is atomically NULL, TRUE is returned; otherwise, FALSE is returned.

Syntax

bool isNull() const;

isOpen()

Tests whether the CLOB is open. If the CLOB is open, TRUE is returned; otherwise, FALSE is returned.

Syntax

bool isOpen() const;

length()

Returns the number of characters in the CLOB.

Syntax

unsigned int length() const;

open()

Opens the CLOB in read/write or read-only mode.

Syntax

void open(
   LObOpenMode mode = OCCI_LOB_READWRITE);

Parameter	Description
mode	`The mode the` `CLOB` `is to be opened in. Valid values are:` `OCCI_LOB_READWRITE` `OCCI_LOB_READONLY`

operator=()

Assigns a CLOB to the current CLOB. The source CLOB gets copied to the destination CLOB only when the destination CLOB gets stored in the table.

Syntax

Clob& operator=(
   const Clob &srcClob);

Parameter	Description
srcClob	The `Clob` from which the data must be copied.

operator==()

Compares two Clob objects for equality. Two Clob objects are equal if they both refer to the same CLOB. Two NULL Clob objects are not considered equal. If the Blob objects are equal, then TRUE is returned; otherwise, FALSE is returned.

Syntax

bool operator==(
   const Clob &srcClob) const;

Parameter	Description
srcClob	The `Clob` object to be compared with the current `Clob` object.

operator!=()

Compares two Clob objects for inequality. Two Clob objects are equal if they both refer to the same CLOB. Two NULL Clob objects are not considered equal. If the Clob objects are not equal, then TRUE is returned; otherwise, FALSE is returned.

Syntax

bool operator!=(
   const Clob &srcClob) const;

Parameter	Description
srcClob	The `Clob` object to be compared with the current `Clob` object.

read()

Reads a part or all of the CLOB into a buffer.

Returns the actual number of characters read for fixed-width charactersets, such as UTF16, or the number of bytes read for multibyte charactersets, including UTF8.

The client's character set id and form is used by default, unless they are explicitly set through setCharSetId(), setCharSetIdUString() and setCharSetForm() calls.

Note that for the second version of the method, the return value represents either the number of characters read for fixed-width charactersets (UTF16), or the number of bytes read for multibyte charactersets (including UTF8).

Syntax	Description
unsigned int read( unsigned int amt, unsigned char *buffer, unsigned int bufsize, unsigned int offset=1) const;	Reads a part or all of the `CLOB` into a buffer.
unsigned int read( unsigned int amt, unsigned utext *buffer, unsigned int bufsize, unsigned int offset=1) const;	Reads a part or all of the `CLOB` into a buffer; globalization enabled. Should be called after setting character set to OCCIUTF16 using `setCharSetId()` method.

Parameter	Description
amt	The number of bytes to be read. from the `CLOB`.
buffer	The buffer that the `CLOB` data is to be read into.
buffsize	The size of the buffer. Valid values are numbers greater than or equal to `amt`.
offset	The starting position at which to begin reading data from the `CLOB`. If `offset` is not specified, the data is written from the beginning of the `CLOB`. Valid values are numbers greater than or equal to 1.

setCharSetId()

Sets the Character set Id associated with Clob. The characterset id set is used for read/write and getStream() operations. If no value is set explicitly, the default client's character set id is used. List of character sets supported is given in Globalization Support Guide Appendix A.

Syntax

void setCharSetId(
   const string &charset);

Parameter	Description
charset	Oracle supported characterset name, such as `E8DEC`, `ZHT16BIG5`, or `OCCIUTF16`.

setCharSetIdUString()

Sets the characterset id associated with Clob; used when the environment's characterset is UTF16. The charset id set is used for read, write and getStream() operations.

Syntax

void setCharSetIdUSString(
   const string &charset);

Parameter	Description
charset	Oracle supported characterset name, such as `WE8DEC`, `ZHT16BIG5`, or `OCCIUTF16` in `UString` (UTF16 characterset).

setCharSetForm()

Sets the character set form associated with the CLOB. The charset form set is used for read, write and getStream() operations. If no value is set explicitly, by default, OCCI_SQLCS_IMPLICIT is used.

Syntax

void setCharSetForm(
   CharSetForm csfrm );

Parameter	Description
csfrm	The charset form for `Clob`.

setContentType()

Sets the content type of the Clob. If the Clob is not a SecureFile, throws an exception.

Syntax

void setContentType(
   const string contenttype);

Parameter	Description
contenttype	The content type of the `Clob`; an ASCII Mime compliant string.

setEmpty()

Sets the Clob object to empty.

Syntax	Description
void setEmpty();	Sets the `Clob` object to empty.
void setEmpty( const Connection* connectionp);	Sets the `Clob` object to empty and initializes the connection pointer to the passed parameter.

Parameter	Description
connectionp	The new connection pointer for the `Clob` object.

setNull()

Sets the Clob object to atomically NULL.

Syntax

void setNull();

setOptions()

Specifies a LobOptionValue for a particular LobOptionType. Enables advanced compression, encryption and deduplication of CLOBs. See Table 7-1, "Values of Type LobOptionType" and Table 7-2, "Values of Type LobOptionValue".

Throws an exception if attempting to set or un-set an option that is not configured on the database column or partition that stores the CLOB.

Throws an exception if attempting to turn off encryption in an encrypted CLOB column.

Syntax

void setOptions(
   LobOptionType optType,
   LobOptionValue optValue);

Parameter	Description
optType	The `LobOptionType` setting being specified. These may be combined using bitwise `or` (`\|`) to avoid server round trips.
optValue	The `LobOptionValue` setting for the `LobOptionType` specified by the `optType` parameter

trim()

Truncates the CLOB to the new length specified.

Syntax

void trim(
   unsigned int newlen);

Parameter	Description
newlen	The new length of the `CLOB`. Valid values are numbers less than or equal to the current length of the `CLOB`.

write()

Writes data from a buffer into a CLOB.

This method implicitly opens the CLOB, copies the buffer into the CLOB, and implicitly closes the CLOB. If the CLOB is open, use writeChunk() instead. The actual number of characters written is returned. The client's character set id and form is used by default, unless they are explicitly set through setCharSetId() and setCharSetForm() calls.

Syntax	Description
unsigned int write( unsigned int amt, unsigned char *buffer, unsigned int bufsize, unsigned int offset=1);	Writes data from a buffer into a `CLOB`.
unsigned int write( unsigned int amt, utext *buffer, unsigned int bufsize, unsigned int offset=1);	Writes data from a UTF16 buffer into a `CLOB`; globalization enabled. Should be called after setting character set to OCCIUTF16 using setCharSetIdUString() method.

Parameter	Description
amt	The amount parameter represents: number of characters written for fixed-width charactersets (UTF16) number of bytes written for multibyte charactersets (including UTF8)
buffer	The buffer containing the data to be written to the `CLOB`.
buffsize	The size of the buffer containing the data to be written to the `CLOB.` Valid values are numbers greater than or equal to `amt`.
offset	The starting position at which to begin writing data into the `CLOB`. If `offset` is not specified, the data is written from the beginning of the `CLOB`. Valid values are numbers greater than or equal to 1.

writeChunk()

Writes data from a buffer into a previously opened CLOB.

The actual number of characters written is returned. The client's character set id and form is used by default, unless they are explicitly set through setCharSetId() and setCharSetForm() calls.

Syntax	Description
unsigned int writeChunk( unsigned int amt, unsigned char *buffer, unsigned int bufsize, unsigned int offset=1);	Writes data from a buffer into a previously opened `CLOB`.
unsigned int writeChunk( unsigned int amt, utext *buffer, unsigned int bufsize, unsigned int offset=1);	Writes data from a UTF16 buffer into a `CLOB`; globalization enabled. Should be called after setting characterset to `OCCIUTF16` using setCharSetIdUString() method.

Parameter	Description
amt	The amount parameter represents number of characters written for fixed-width charactersets (UTF16) number of bytes written for multibyte charactersets (including UTF8)
buffer	The buffer containing the data to be written to the `CLOB`.
buffsize	The size of the buffer containing the data to be written to the `CLOB.` Valid values are numbers greater than or equal to `amt`.
offset	The starting position at which to begin writing data into the `CLOB`. If `offset` is not specified, the data is written from the beginning of the `CLOB`. Valid values are numbers greater than or equal to 1.