Skip Headers
Oracle® Database PL/SQL Packages and Types Reference
11g Release 2 (11.2)

Part Number E10577-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

220 UTL_FILE

With the UTL_FILE package, PL/SQL programs can read and write operating system text files. UTL_FILE provides a restricted version of operating system stream file I/O.

This chapter contains the following topics:


Using UTL_FILE


Security Model

The set of files and directories that are accessible to the user through UTL_FILE is controlled by a number of factors and database parameters. Foremost of these is the set of directory objects that have been granted to the user. The nature of directory objects is discussed in the Oracle Database SQL Language Reference.

Assuming the user has both READ and WRITE access to the directory object USER_DIR, the user can open a file located in an accessible directory, but not in subdirectories or parent directories.

Lastly, the client (text I/O) and server implementations are subject to server-side file system permission checking.

UTL_FILE provides file access both on the client side and on the server side. When run on the server, UTL_FILE provides access to all operating system files that are accessible from the server. On the client side, as in the case for Forms applications, UTL_FILE provides access to operating system files that are accessible from the client.

In the past, accessible directories for the UTL_FILE functions were specified in the initialization file using the UTL_FILE_DIR parameter. However, UTL_FILE_DIR access is no longer recommended. Oracle recommends that you instead use the directory object feature, which replaces UTL_FILE_DIR. Directory objects offer more flexibility and granular control to the UTL_FILE application administrator, can be maintained dynamically (that is, without shutting down the database), and are consistent with other Oracle tools. CREATE ANY DIRECTORY privilege is granted only to SYS and SYSTEM by default.

Note:

Use the CREATE DIRECTORY feature instead of UTL_FILE_DIR for directory access verification.

On UNIX systems, the owner of a file created by the FOPEN function is the owner of the shadow process running the instance. Normally, this owner is ORACLE. Files created using FOPEN are always writable and readable using the UTL_FILE subprograms. However, non-privileged users who need to read these files outside of PL/SQL may need access from a system administrator.

Caution:

 

  • The privileges needed to access files in a directory object are operating system specific. UTL_FILE directory object privileges give you read and write access to all files within the specified directory.

  • Attempting to apply invalid options will give rise to unpredictable results.


Operational Notes

The file location and file name parameters are supplied to the FOPEN function as separate strings, so that the file location can be checked against the list of accessible directories as specified by the ALL_DIRECTORIES view of accessible directory objects. Together, the file location and name must represent a legal filename on the system, and the directory must be accessible. A subdirectory of an accessible directory is not necessarily also accessible; it too must be specified using a complete path name matching an ALL_DIRECTORIES object.

UTL_FILE implicitly interprets line terminators on read requests, thereby affecting the number of bytes returned on a GET_LINE call. For example, the len parameter of UTL_FILE.GET_LINE specifies the requested number of bytes of character data. The number of bytes actually returned to the user will be the lesser of:

The FOPEN max_linesize parameter must be a number in the range 1 and 32767. If unspecified, Oracle supplies a default value of 1024. The GET_LINE len parameter must be a number in the range 1 and 32767. If unspecified, Oracle supplies the default value of max_linesize. If max_linesize and len are defined to be different values, then the lesser value takes precedence.

UTL_FILE.GET_RAW ignores line terminators and returns the actual number of bytes requested by the GET_RAW len parameter.

When data encoded in one character set is read and Globalization Support is told (such as by means of NLS_LANG) that it is encoded in another character set, the result is indeterminate. If NLS_LANG is set, it should be the same as the database character set.


Rules and Limits

Operating system-specific parameters, such as C-shell environment variables under UNIX, cannot be used in the file location or file name parameters.

UTL_FILE I/O capabilities are similar to standard operating system stream file I/O (OPEN, GET, PUT, CLOSE) capabilities, but with some limitations. For example, you call the FOPEN function to return a file handle, which you use in subsequent calls to GET_LINE or PUT to perform stream I/O to a file. When file I/O is done, you call FCLOSE to complete any output and free resources associated with the file.

Note:

The UTL_FILE package is similar to the client-side TEXT_IO package currently provided by Oracle Procedure Builder. Restrictions for a server implementation require some API differences between UTL_FILE and TEXT_IO. In PL/SQL file I/O, errors are returned using PL/SQL exceptions.

Exceptions

Table 220-1 UTL_FILE Package Exceptions

Exception Name Description

INVALID_PATH

File location is invalid.

INVALID_MODE

The open_mode parameter in FOPEN is invalid.

INVALID_FILEHANDLE

File handle is invalid.

INVALID_OPERATION

File could not be opened or operated on as requested.

READ_ERROR

Destination buffer too small, or operating system error occurred during the read operation

WRITE_ERROR

Operating system error occurred during the write operation.

INTERNAL_ERROR

Unspecified PL/SQL error

CHARSETMISMATCH

A file is opened using FOPEN_NCHAR, but later I/O operations use nonchar functions such as PUTF or GET_LINE.

FILE_OPEN

The requested operation failed because the file is open.

INVALID_MAXLINESIZE

The MAX_LINESIZE value for FOPEN() is invalid; it should be within the range 1 to 32767.

INVALID_FILENAME

The filename parameter is invalid.

ACCESS_DENIED

Permission to access to the file location is denied.

INVALID_OFFSET

Causes of the INVALID_OFFSET exception:

  • ABSOLUTE_OFFSET = NULL and RELATIVE_OFFSET = NULL, or

  • ABSOLUTE_OFFSET < 0, or

  • Either offset caused a seek past the end of the file

DELETE_FAILED

The requested file delete operation failed.

RENAME_FAILED

The requested file rename operation failed.


Procedures in UTL_FILE can also raise predefined PL/SQL exceptions such as NO_DATA_FOUND or VALUE_ERROR.


Examples

Example 1

Note:

The examples are UNIX-specific.

Given the following:

SQL> CREATE DIRECTORY log_dir AS '/appl/gl/log'; 
SQL> GRANT READ ON DIRECTORY log_dir TO DBA; 
SQL> GRANT WRITE ON DIRECTORY log_dir TO DBA; 

SQL> CREATE DIRECTORY USER_DIR AS '/appl/gl/user''; 
SQL> GRANT READ ON DIRECTORY USER_DIR TO PUBLIC; 
SQL> GRANT WRITE ON DIRECTORY USER_DIR TO PUBLIC; 

The following file locations and filenames are valid and accessible as follows:

File Location Filename READ and WRITE
/appl/gl/log L12345.log Users with DBA privilege
/appl/gl/user u12345.tmp All users

The following file locations and filenames are invalid:

File Location Filename Invalid Because
/appl/gl/log/backup L12345.log # subdirectories are not accessible
/APPL/gl/log L12345.log # directory strings must follow case sensitivity rules as required by the O/S
/appl/gl/log backup/L1234.log # filenames may not include portions of directory paths
/user/tmp L12345.log # no corresponding CREATE DIRECTORY command has been issued

Example 2

DECLARE 
  V1 VARCHAR2(32767); 
  F1 UTL_FILE.FILE_TYPE; 
BEGIN 
  -- In this example MAX_LINESIZE is less than GET_LINE's length request 
  -- so the number of bytes returned will be 256 or less if a line terminator is seen. 
  F1 := UTL_FILE.FOPEN('USER_DIR','u12345.tmp','R',256); 
  UTL_FILE.GET_LINE(F1,V1,32767); 
  UTL_FILE.FCLOSE(F1); 

  -- In this example, FOPEN's MAX_LINESIZE is NULL and defaults to 1024, 
  -- so the number of bytes returned will be 1024 or less if a line terminator is seen. 
  F1 := UTL_FILE.FOPEN('USER_DIR','u12345.tmp','R'); 
  UTL_FILE.GET_LINE(F1,V1,32767); 
  UTL_FILE.FCLOSE(F1); 

  -- In this example, GET_LINE doesn't specify a number of bytes, so it defaults to 
  -- the same value as FOPEN's MAX_LINESIZE which is NULL in this case and defaults to 1024. 
  -- So the number of bytes returned will be 1024 or less if a line terminator is seen. 
  F1 := UTL_FILE.FOPEN('USER_DIR','u12345.tmp','R'); 
  UTL_FILE.GET_LINE(F1,V1); 
  UTL_FILE.FCLOSE(F1); 
END; 

Data Structures

The UTL_FILE package defines a RECORD type.

Record Types


FILETYPE Record Type

The contents of FILE_TYPE are private to the UTL_FILE package. You should not reference or change components of this record.

TYPE file_type IS RECORD (
   id          BINARY_INTEGER, 
   datatype    BINARY_INTEGER,
   byte_mode   BOOLEAN);

Fields

Table 220-2 FILE_TYPE Fields

Field Description

id

A numeric value indicating the internal file handle number

datatype

Indicates whether the file is a CHAR file, Nchar file or other (binary)

byte_mode

Indicates whether the file was open as a binary file, or as a text file


Caution:

Oracle does not guarrantee the persistence of FILE_TYPE values between database sessions or within a single session. Attempts to clone file handles or use dummy file handles may have inderterminate outcomes.

Summary of UTL_FILE Subprograms

Table 220-3 UTL_FILE Subprograms

Subprogram Description

FCLOSE Procedure

Closes a file

FCLOSE_ALL Procedure

Closes all open file handles

FCOPY Procedure

Copies a contiguous portion of a file to a newly created file

FFLUSH Procedure

Physically writes all pending output to a file

FGETATTR Procedure

Reads and returns the attributes of a disk file

FGETPOS Function

Returns the current relative offset position within a file, in bytes

FOPEN Function

Opens a file for input or output

FOPEN_NCHAR Function

Opens a file in Unicode for input or output

FREMOVE Procedure

Deletes a disk file, assuming that you have sufficient privileges

FRENAME Procedure

Renames an existing file to a new name, similar to the UNIX mv function

FSEEK Procedure

Adjusts the file pointer forward or backward within the file by the number of bytes specified

GET_LINE Procedure

Reads text from an open file

GET_LINE_NCHAR Procedure

Reads text in Unicode from an open file

GET_RAW Function

Reads a RAW string value from a file and adjusts the file pointer ahead by the number of bytes read

IS_OPEN Function

Determines if a file handle refers to an open file

NEW_LINE Procedure

Writes one or more operating system-specific line terminators to a file

PUT Procedure

Writes a string to a file

PUT_LINE Procedure

Writes a line to a file, and so appends an operating system-specific line terminator

PUT_LINE_NCHAR Procedure

Writes a Unicode line to a file

PUT_NCHAR Procedure

Writes a Unicode string to a file

PUTF Procedure

A PUT procedure with formatting

PUTF_NCHAR Procedure

A PUT_NCHAR procedure with formatting, and writes a Unicode string to a file, with formatting

PUT_RAW Function

Accepts as input a RAW data value and writes the value to the output buffer



FCLOSE Procedure

This procedure closes an open file identified by a file handle.

Syntax

UTL_FILE.FCLOSE (
   file IN OUT FILE_TYPE);

Parameters

Table 220-4 FCLOSE Procedure Parameters

Parameter Description

file

Active file handle returned by an FOPEN or FOPEN_NCHAR call


Usage Notes

If there is buffered data yet to be written when FCLOSE runs, then you may receive a WRITE_ERROR exception when closing a file.

Exceptions

WRITE_ERROR
INVALID_FILEHANDLE

FCLOSE_ALL Procedure

This procedure closes all open file handles for the session. This should be used as an emergency cleanup procedure, for example, when a PL/SQL program exits on an exception.

Syntax

UTL_FILE.FCLOSE_ALL;

Usage Notes

Note:

FCLOSE_ALL does not alter the state of the open file handles held by the user. This means that an IS_OPEN test on a file handle after an FCLOSE_ALL call still returns TRUE, even though the file has been closed. No further read or write operations can be performed on a file that was open before an FCLOSE_ALL.

Exceptions

WRITE_ERROR

FCOPY Procedure

This procedure copies a contiguous portion of a file to a newly created file. By default, the whole file is copied if the start_line and end_line parameters are omitted. The source file is opened in read mode. The destination file is opened in write mode. A starting and ending line number can optionally be specified to select a portion from the center of the source file for copying.

Syntax

UTL_FILE.FCOPY (
   src_location    IN VARCHAR2,
   src_filename    IN VARCHAR2,
   dest_location   IN VARCHAR2,
   dest_filename   IN VARCHAR2,
   start_line      IN BINARY_INTEGER DEFAULT 1,
   end_line        IN BINARY_INTEGER DEFAULT NULL);

Parameters

Table 220-5 FCOPY Procedure Parameters

Parameters Description

src_location

Directory location of the source file, a DIRECTORY_NAME from the ALL_DIRECTORIES view (case sensitive)

src_filename

Source file to be copied

dest_location

Destination directory where the destination file is created

dest_filename

Destination file created from the source file

start_line

Line number at which to begin copying. The default is 1 for the first line

end_line

Line number at which to stop copying. The default is NULL, signifying end of file



FFLUSH Procedure

FFLUSH physically writes pending data to the file identified by the file handle. Normally, data being written to a file is buffered. The FFLUSH procedure forces the buffered data to be written to the file. The data must be terminated with a newline character.

Flushing is useful when the file must be read while still open. For example, debugging messages can be flushed to the file so that they can be read immediately.

Syntax

UTL_FILE.FFLUSH (
   file  IN FILE_TYPE);
invalid_maxlinesize  EXCEPTION;

Parameters

Table 220-6 FFLUSH Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN or FOPEN_NCHAR call


Exceptions

INVALID_FILEHANDLE
INVALID_OPERATION
WRITE_ERROR

FGETATTR Procedure

This procedure reads and returns the attributes of a disk file.

Syntax

UTL_FILE.FGETATTR(
   location    IN VARCHAR2, 
   filename    IN VARCHAR2, 
   fexists     OUT BOOLEAN, 
   file_length OUT NUMBER, 
   blocksize   OUT BINARY_INTEGER);

Parameters

Table 220-7 FGETATTR Procedure Parameters

Parameters Description

location

Directory location of the source file, a DIRECTORY_NAME from the ALL_DIRECTORIES view (case sensitive)

filename

Name of the file to be examined

fexists

A BOOLEAN for whether or not the file exists

file_length

Length of the file in bytes. NULL if file does not exist.

blocksize

File system block size in bytes. NULL if the file does not exist.



FGETPOS Function

This function returns the current relative offset position within a file, in bytes.

Syntax

UTL_FILE.FGETPOS (
   fileid IN FILE_TYPE)
 RETURN PLS_INTEGER;

Parameters

Table 220-8 FGETPOS Parameters

Parameters Description

fileid

Directory location of the source file


Return Values

FGETPOS returns the relative offset position for an open file, in bytes. It raises an exception if the file is not open. It returns 0 for the beginning of the file.

Usage Notes

If file is opened for byte mode operations, then the INVALID OPERATION exception is raised.


FOPEN Function

This function opens a file. You can specify the maximum line size and have a maximum of 50 files open simultaneously. See also FOPEN_NCHAR Function.

Syntax

UTL_FILE.FOPEN (
   location     IN VARCHAR2,
   filename     IN VARCHAR2,
   open_mode    IN VARCHAR2,
   max_linesize IN BINARY_INTEGER DEFAULT 1024) 
  RETURN FILE_TYPE;

Parameters

Table 220-9 FOPEN Function Parameters

Parameter Description

location

Directory location of file. This string is a directory object name and is case sensitive. The default is uppercase. Read privileges must be granted on this directory object for the UTL_FILE user to run FOPEN.

filename

File name, including extension (file type), without directory path. If a directory path is given as a part of the filename, it is ignored by FOPEN. On Unix, the filename cannot end with /.

open_mode

Specifies how the file is opened. Modes include:

  • r -- read text

  • w -- write text

  • a -- append text

  • rb -- read byte mode

  • wb -- write byte mode

  • ab -- append byte mode

If you try to open a file specifying 'a' or 'ab' for open_mode but the file does not exist, the file is created in write mode.

max_linesize

Maximum number of characters for each line, including the newline character, for this file (minimum value 1, maximum value 32767). If unspecified, Oracle supplies a default value of 1024.


Return Values

FOPEN returns a file handle, which must be passed to all subsequent procedures that operate on that file. The specific contents of the file handle are private to the UTL_FILE package, and individual components should not be referenced or changed by the UTL_FILE user.

Table 220-10 FOPEN Function Return Values

Return Description

FILE_TYPE

Handle to open file.


Usage Notes

The file location and file name parameters must be supplied to the FOPEN function as quoted strings so that the file location can be checked against the list of accessible directories as specified by the ALL_DIRECTORIES view of accessible directory objects.

Exceptions

INVALID_PATH: File location or name was invalid.
INVALID_MODE: The open_mode string was invalid.
INVALID_OPERATION: File could not be opened as requested.
INVALID_MAXLINESIZE: Specified max_linesize is too large or too small.

FOPEN_NCHAR Function

This function opens a file in national character set mode for input or output, with the maximum line size specified. You can have a maximum of 50 files open simultaneously. With this function, you can read or write a text file in Unicode instead of in the database character set.

Even though the contents of an NVARCHAR2 buffer may be AL16UTF16 or UTF8 (depending on the national character set of the database), the contents of the file are always read and written in UTF8. UTL_FILE converts between UTF8 and AL16UTF16 as necessary.

See also FOPEN Function.

Syntax

UTL_FILE.FOPEN_NCHAR (
   location     IN VARCHAR2,
   filename     IN VARCHAR2,
   open_mode    IN VARCHAR2,
   max_linesize IN BINARY_INTEGER DEFAULT 1024) 
RETURN FILE_TYPE;

Parameters

Table 220-11 FOPEN_NCHAR Function Parameters

Parameter Description

location

Directory location of file

filename

File name (including extension)

open_mode

Open mode (r,w,a,rb,wb,ab)

max_linesize

Maximum number of characters for each line, including the newline character, for this file. (minimum value 1, maximum value 32767).


Return Values

FOPEN_NCHAR returns a file handle, which must be passed to all subsequent procedures that operate on that file. The specific contents of the file handle are private to the UTL_FILE package, and individual components should not be referenced or changed by the UTL_FILE user.

Table 220-12 FOPEN_NCHAR Function Return Values

Return Description

FILE_TYPE

Handle to open file



FREMOVE Procedure

This procedure deletes a disk file, assuming that you have sufficient privileges.

Syntax

UTL_FILE.FREMOVE (
   location IN VARCHAR2,
   filename IN VARCHAR2);

Parameters

Table 220-13 FREMOVE Procedure Parameters

Parameters Description

location

Directory location of the file, a DIRECTORY_NAME from ALL_DIRECTORIES (case sensitive)

filename

Name of the file to be deleted


Usage Notes

The FREMOVE procedure does not verify privileges before deleting a file. The O/S verifies file and directory permissions. An exception is returned on failure.


FRENAME Procedure

This procedure renames an existing file to a new name, similar to the UNIX mv function.

Syntax

UTL_FILE.FRENAME (
   src_location     IN   VARCHAR2,
   src_filename     IN   VARCHAR2, 
   dest_location    IN   VARCHAR2,
   dest_filename    IN   VARCHAR2,
   overwrite        IN   BOOLEAN DEFAULT FALSE);

Parameters

Table 220-14 FRENAME Procedure Parameters

Parameters Description

src_location

Directory location of the source file, a DIRECTORY_NAME from the ALL_DIRECTORIES view (case sensitive)

src_filename

Source file to be renamed

dest_location

Destination directory of the destination file, a DIRECTORY_NAME from the ALL_DIRECTORIES view (case sensitive)

dest_filename

New name of the file

overwrite

Default is FALSE


Usage Notes

Permission on both the source and destination directories must be granted. You can use the overwrite parameter to specify whether or not to overwrite a file if one exists in the destination directory. The default is FALSE for no overwrite.


FSEEK Procedure

This procedure adjusts the file pointer forward or backward within the file by the number of bytes specified.

Syntax

UTL_FILE.FSEEK (
   file             IN  UTL_FILE.FILE_TYPE,
   absolute_offset  IN  PL_INTEGER DEFAULT NULL,
   relative_offset  IN  PLS_INTEGER DEFAULT NULL);

Parameters

Table 220-15 FSEEK Procedure Parameters

Parameters Description

file

File ID

absolute_offset

Absolute location to which to seek; default = NULL

relative_offset

Number of bytes to seek forward or backward; positive = forward, negative integer = backward, zero = current position, default = NULL


Usage Notes


GET_LINE Procedure

This procedure reads text from the open file identified by the file handle and places the text in the output buffer parameter. Text is read up to, but not including, the line terminator, or up to the end of the file, or up to the end of the len parameter. It cannot exceed the max_linesize specified in FOPEN.

Syntax

UTL_FILE.GET_LINE (
   file        IN  FILE_TYPE,
   buffer      OUT VARCHAR2,
   len         IN  PLS_INTEGER DEFAULT NULL);

Parameters

Table 220-16 GET_LINE Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN call.

The file must be open for reading (mode r); otherwise an INVALID_OPERATION exception is raised.

buffer

Data buffer to receive the line read from the file

len

The number of bytes read from the file. Default is NULL. If NULL, Oracle supplies the value of max_linesize.


Usage Notes

If the line does not fit in the buffer, a READ_ERROR exception is raised. If no text was read due to end of file, the NO_DATA_FOUND exception is raised. If the file is opened for byte mode operations, the INVALID_OPERATION exception is raised.

Because the line terminator character is not read into the buffer, reading blank lines returns empty strings.

The maximum size of the buffer parameter is 32767 bytes unless you specify a smaller size in FOPEN.If unspecified, Oracle supplies a default value of 1024. See also "GET_LINE_NCHAR Procedure".

Exceptions

INVALID_FILEHANDLE
INVALID_OPERATION
READ_ERROR
NO_DATA_FOUND

GET_LINE_NCHAR Procedure

This procedure reads text from the open file identified by the file handle and places the text in the output buffer parameter. With this function, you can read a text file in Unicode instead of in the database character set.

The file must be opened in national character set mode, and must be encoded in the UTF8 character set. The expected buffer datatype is NVARCHAR2. If a variable of another datatype, such as NCHAR, NCLOB, or VARCHAR2 is specified, PL/SQL will perform standard implicit conversion from NVARCHAR2 after the text is read.

See also GET_LINE Procedure

Syntax

UTL_FILE.GET_LINE_NCHAR (
   file        IN  FILE_TYPE,
   buffer      OUT NVARCHAR2,
   len         IN  PLS_INTEGER DEFAULT NULL);

Parameters

Table 220-17 GET_LINE_NCHAR Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN_NCHAR call. The file must be open for reading (mode r). If the file is opened by FOPEN instead of FOPEN_NCHAR, a CHARSETMISMATCH exception is raised.

buffer

Data buffer to receive the line read from the file.

len

The number of bytes read from the file. Default is NULL. If NULL, Oracle supplies the value of max_linesize.



GET_RAW Function

This function reads a RAW string value from a file and adjusts the file pointer ahead by the number of bytes read. UTL_FILE.GET_RAW ignores line terminators and returns the actual number of bytes requested by the GET_RAW len parameter.

Syntax

UTL_FILE.GET_RAW (
   file       IN            UTL_FILE.FILE_TYPE, 
   buffer     OUT NOCOPY    RAW, 
   len        IN            PLS_INTEGER DEFAULT NULL);

Parameters

Table 220-18 GET_RAW Procedure Parameters

Parameters Description

file

File ID

buffer

RAW data

len

The number of bytes read from the file. Default is NULL. If NULL, len is assumed to be the maximum length of RAW.


Usage Notes

The subprogram will raise No_Data_Found when it attempts to read past the end of the file. Your application should allow for this by catching the exception in its processing loop.

PROCEDURE Sys.p (n IN VARCHAR2) IS
      h     UTL_FILE.FILE_TYPE := UTL_FILE.FOPEN('D', n, 'r', 32767);
      Buf   RAW(32767);
      Amnt  CONSTANT PLS_INTEGER := 32767;
    BEGIN
      LOOP
        BEGIN
          Utl_File.Get_Raw(h, Buf, Amnt);
          -- Do something with this chunk
        EXCEPTION WHEN No_Data_Found THEN EXIT; END;
      END LOOP;
      UTL_FILE.FCLOSE (h);
    END;

IS_OPEN Function

This function tests a file handle to see if it identifies an open file. IS_OPEN reports only whether a file handle represents a file that has been opened, but not yet closed. It does not guarantee that there will be no operating system errors when you attempt to use the file handle.

Syntax

UTL_FILE.IS_OPEN (
   file  IN FILE_TYPE)
  RETURN BOOLEAN;

Parameters

Table 220-19 IS_OPEN Function Parameters

Parameter Description

file

Active file handle returned by an FOPEN or FOPEN_NCHAR call


Return Values

TRUE or FALSE


NEW_LINE Procedure

This procedure writes one or more line terminators to the file identified by the input file handle. This procedure is separate from PUT because the line terminator is a platform-specific character or sequence of characters.

Syntax

UTL_FILE.NEW_LINE (
   file     IN FILE_TYPE,
   lines    IN NATURAL := 1);

Parameters

Table 220-20 NEW_LINE Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN or FOPEN_NCHAR call

lines

Number of line terminators to be written to the file


Exceptions

INVALID_FILEHANDLE
INVALID_OPERATION
WRITE_ERROR

PUT Procedure

PUT writes the text string stored in the buffer parameter to the open file identified by the file handle. The file must be open for write operations. No line terminator is appended by PUT; use NEW_LINE to terminate the line or use PUT_LINE to write a complete line with a line terminator. See also "PUT_NCHAR Procedure".

Syntax

UTL_FILE.PUT (
   file      IN FILE_TYPE,
   buffer    IN VARCHAR2);

Parameters

Table 220-21 PUT Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN_NCHAR call. The file must be open for writing.

buffer

Buffer that contains the text to be written to the file.

User must have opened the file using mode w or mode a; otherwise, an INVALID_OPERATION exception is raised.


Usage Notes

The maximum size of the buffer parameter is 32767 bytes unless you specify a smaller size in FOPEN. If unspecified, Oracle supplies a default value of 1024. The sum of all sequential PUT calls cannot exceed 32767 without intermediate buffer flushes.

Exceptions

INVALID_FILEHANDLE
INVALID_OPERATION
WRITE_ERROR

PUT_LINE Procedure

This procedure writes the text string stored in the buffer parameter to the open file identified by the file handle. The file must be open for write operations. PUT_LINE terminates the line with the platform-specific line terminator character or characters.

See also "PUT_LINE_NCHAR Procedure".

Syntax

UTL_FILE.PUT_LINE (
   file      IN FILE_TYPE,
   buffer    IN VARCHAR2,
   autoflush IN BOOLEAN DEFAULT FALSE);

Parameters

Table 220-22 PUT_LINE Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN call

buffer

Text buffer that contains the lines to be written to the file.

autoflush

Flushes the buffer to disk after the WRITE.


Usage Notes

Exceptions

INVALID_FILEHANDLE
INVALID_OPERATION
WRITE_ERROR

PUT_LINE_NCHAR Procedure

This procedure writes the text string stored in the buffer parameter to the open file identified by the file handle. With this function, you can write a text file in Unicode instead of in the database character set. This procedure is equivalent to the PUT_NCHAR Procedure, except that the line separator is appended to the written text. See also PUT_LINE Procedure.

Syntax

UTL_FILE.PUT_LINE_NCHAR (
   file    IN FILE_TYPE,
   buffer  IN NVARCHAR2);

Parameters

Table 220-23 PUT_LINE_NCHAR Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN_NCHAR call. The file must be open for writing.

buffer

Text buffer that contains the lines to be written to the file


Usage Notes


PUT_NCHAR Procedure

This procedure writes the text string stored in the buffer parameter to the open file identified by the file handle.

With this function, you can write a text file in Unicode instead of in the database character set. The file must be opened in the national character set mode. The text string will be written in the UTF8 character set. The expected buffer datatype is NVARCHAR2. If a variable of another datatype is specified, PL/SQL will perform implicit conversion to NVARCHAR2 before writing the text.

See also PUT Procedure

Syntax

UTL_FILE.PUT_NCHAR (
   file      IN FILE_TYPE,
   buffer    IN NVARCHAR2);

Parameters

Table 220-24 PUT_NCHAR Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN_NCHAR call. If the file is opened by FOPEN instead of FOPEN_NCHAR, a CHARSETMISMATCH exception is raised.

buffer

Buffer that contains the text to be written to the file.

User must have opened the file using mode w or mode a; otherwise, an INVALID_OPERATION exception is raised.


Usage Notes

The maximum size of the buffer parameter is 32767 bytes unless you specify a smaller size in FOPEN. If unspecified, Oracle supplies a default value of 1024. The sum of all sequential PUT calls cannot exceed 32767 without intermediate buffer flushes.


PUTF Procedure

This procedure is a formatted PUT procedure. It works like a limited printf(). See also PUTF_NCHAR Procedure.

Syntax

UTL_FILE.PUTF (
   file    IN FILE_TYPE,
   format  IN VARCHAR2,
   [arg1   IN VARCHAR2  DEFAULT NULL,
   . . .  
   arg5    IN VARCHAR2  DEFAULT NULL]); 

Parameters

Table 220-25 PUTF Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN call

format

Format string that can contain text as well as the formatting characters \n and %s

arg1..arg5

From one to five operational argument strings.

Argument strings are substituted, in order, for the %s formatters in the format string.

If there are more formatters in the format parameter string than there are arguments, then an empty string is substituted for each %s for which there is no argument.


Usage Notes

Examples

The following example writes the lines:

Hello, world!
I come from Zork with greetings for all earthlings.

my_world  varchar2(4) := 'Zork';
...
PUTF(my_handle, 'Hello, world!\nI come from %s with %s.\n',
                my_world,
                'greetings for all earthlings');

If there are more %s formatters in the format parameter than there are arguments, then an empty string is substituted for each %s for which there is no matching argument.

Exceptions

INVALID_FILEHANDLE
INVALID_OPERATION
WRITE_ERROR

PUTF_NCHAR Procedure

This procedure is a formatted version of a PUT_NCHAR Procedure. Using PUTF_NCHAR, you can write a text file in Unicode instead of in the database character set. It accepts a format string with formatting elements \n and %s, and up to five arguments to be substituted for consecutive instances of %s in the format string. The expected datatype of the format string and the arguments is NVARCHAR2.

If variables of another datatype are specified, PL/SQL will perform implicit conversion to NVARCHAR2 before formatting the text. Formatted text is written in the UTF8 character set to the file identified by the file handle. The file must be opened in the national character set mode.

Syntax

UTL_FILE.PUTF_NCHAR (
   file    IN FILE_TYPE,
   format  IN NVARCHAR2,
   [arg1   IN NVARCHAR2  DEFAULT NULL,
   . . .  
   arg5    IN NVARCHAR2  DEFAULT NULL]); 

Parameters

Table 220-26 PUTF_NCHAR Procedure Parameters

Parameters Description

file

Active file handle returned by an FOPEN_NCHAR call. The file must be open for reading (mode r). If the file is opened by FOPEN instead of FOPEN_NCHAR, a CHARSETMISMATCH exception is raised.

format

Format string that can contain text as well as the formatting characters \n and %s

arg1..arg5

From one to five operational argument strings.

Argument strings are substituted, in order, for the %s formatters in the format string.

If there are more formatters in the format parameter string than there are arguments, then an empty string is substituted for each %s for which there is no argument.


Usage Notes


PUT_RAW Function

This function accepts as input a RAW data value and writes the value to the output buffer.

Syntax

UTL_FILE.PUT_RAW (
   file          IN    UTL_FILE.FILE_TYPE,
   buffer        IN    RAW, 
   autoflush     IN    BOOLEAN DEFAULT FALSE);

Parameters

Table 220-27 PUT_RAW Procedure Parameters

Parameters Description

file

File ID.

buffer

The RAW data written to the buffer.

autoflush

If TRUE, performs a flush after writing the value to the output buffer; default is FALSE.


Usage Notes

You can request an automatic flush of the buffer by setting the third argument to TRUE.

The maximum size of the buffer parameter is 32767 bytes unless you specify a smaller size in FOPEN. If unspecified, Oracle supplies a default value of 1024. The sum of all sequential PUT calls cannot exceed 32767 without intermediate buffer flushes.